1. Uses and Features:
Our slurry pumps are suitable for pumping slurry with hard particles and in high density in industrial sectors as of metallurgy, mining, coal, power generation and building material. These pumps can also be applied multi-staged in series. They are classified into three types: M. NAH. HH. L.
The M. NAH. HH. L type slurry pumps are those of cantilever, horizontal and centrifugal ones, whose shafts can be sealed by packing seals or by centrifugal type seals. The positions of the pump outlet can be positioned at an interval of 45° According to different requirements, so eight different angles can be applied by rotation in installation.
The M. NAH type slurry pumps have pump bodies (volute liners, front and back liners) that consist of replaceable wear-resistant metal liners or wear-resistant rubber liners, and impellers can also apply wear-resistant metal material or wear-resistant rubber material. The HH type slurry pumps only apply wear-resistant metal material as their pump bodies and impellers.
Naipu® NP-L series Rugged heavy duty slurry pump for medium to lower heads. It incorporates the same design points of the NP-AH(R) and plus higher efficiency impellers at an attractive initial cost. Designed for rugged duties while offering higher efficiencies, the NP-L series is a combination of the proven NP-AH(R) unique features. The pump is available with interchangeable liner options including both metal and various grades of elastomer depending on the application.
2. Structural Image:
L-Series slurry pumps are suitable for severe slurry conditions with coarse particles and high competency.
2.1 There are two types of material for wet parts (volute liners, front and back liners, impellers):
L Made of high-chrome alloy material;
L Made of highly wear-resistant rubber material researched and developed by Naipu company.
Both of them can fulfill the task of slurry pumping with high efficiency and long service life.
2.2 Structure of shaft seals:
L Packing gland seals;
L Pressure-reducing metal gland seals;
L Pressure-reducing rubber gland seals;
L Mechanical seals.
HH Series slurry pumps have two kinds of structural modes, which are the high-chrome alloy one and the rubber wear-resistance one. The wet parts made of either alloy or rubber can be mixed up in operation.
For example: A rubber volute liner and liners can be combined with an alloy impeller in operation, and a rubber impeller can be used together wit an alloy volute liner and liners.
3. Supply of spare parts:
We supply our customers with complete sets of equipment as well as a variety of wear-resistant wet parts, and site service is available with service quality guaranteed.
Type |
Max.
Power
Kw |
Clear Water Performance |
Impeller |
Capacity
m³/hr |
Head/m |
Speed/rpm |
Efficiency
% |
NPSH
m |
Nos
of
Vane |
Diameter
mm |
| 1.5X1-BAH |
15 |
12.6-28.8 |
6-68 |
1200-3800 |
40 |
2-4 |
5 |
152 |
| 2X1.5-BAH |
15 |
32.4-72 |
6-58 |
1200-3200 |
45 |
3.5-8 |
5 |
184 |
| 3X2-CAH |
30 |
39.6-86.4 |
12-64 |
1300-2700 |
55 |
4-6 |
5 |
214 |
| 4X3-CAH |
30 |
86.4-198 |
9-52 |
1000-2200 |
71 |
4-6 |
5 |
245 |
| 6X4-DAH |
60 |
162-360 |
12-56 |
800-1550 |
65 |
5-8 |
5 |
365 |
| 8X6-EAH |
300 |
360-828 |
10-61 |
500-1140 |
72 |
2-9 |
5 |
510 |
| 10X8-FAH |
560 |
612-1368 |
11-61 |
400-850 |
71 |
4-10 |
5 |
686 |
| 12X10-STAH |
560 |
936-1980 |
7-68 |
300-800 |
82 |
6 |
5 |
762 |
| 14X12-STAH |
560 |
1260-2772 |
13-63 |
300-600 |
77 |
3-10 |
5 |
965 |
| 16X14-TUAH |
1200 |
1368-3060 |
11-63 |
250-550 |
79 |
4-10 |
5 |
1067 |
| 18 X16-TUAH |
1200 |
2520-5400 |
13-57 |
200-400 |
85 |
4-10 |
5 |
1370 |
Any question please contact me freely.
Audited Supplier 
){kind=link}
){kind=link}