3/2 C-HA Slurry Pump Frame Plate Liner Insert (C2041)
Direct factory of slurry pump , sand gravel pump , dredging pump , and spare parts located in ShiJiaZhuang , China , With 30 years experience
The pumps and spare parts can be totally interchange with HA HH M L SP AF G Series.
In addition, Naipu also can accept OEM & ODM Service.
Frame Plate Liner (FPL) Insert
Slurry Pump Frame Plate Liner (FPL) Insert is one of import part of Slurry Pumps, it is belong to wed end parts.
The material can be wear/erosion cast alloys (A05,A07,A49,A61,A51,A33 and ect )or elastomers(R55,R33,R08,R26,S31, S21,S42 and etc)
Slurry Pump Frame Plate Liner Insert 100% interchangeable with HA HH M L SP AF G Slurry Pumps FPL insert.
| Frame Plate Liner Insert |
Replacement Slurry Pump Model |
| B1041 |
1.5/1B- HA |
| B15041 |
2/1.5B- HA |
| C2041 |
3/2C- HA |
| D3041 |
4/3C-HA, 4/3D-HA |
| E4041 |
6/4D-HA, 6/4E-HA |
| F6041 |
8/6E-HA, 8/6F-HA, 8/6R-HA |
| G8041 |
10/8ST- HA |
| G10041 |
12/10ST-HA |
| G12041 |
14/12F-HA ,14/12ST-HA |
| H14041 |
16/14TU-HA |
| 175041 |
20A-L |
| 32056 |
50B-L |
| 43041 |
75C-L |
| 64041 |
100D-L |
| 86041 |
150E-L |
| 108041 |
200E-L |
| SL30041 |
300S-L |
| SL35041 |
350S-L |
| STL40041 |
400ST-L |
| STL45041 |
450ST-L |
| TUL55041 |
550TU-L |
| F8041 |
10/8E-M, 10/8F-M, 10/8R-M |
| F10041 |
12/10F-M, 12/10R-M |
| CH1041 |
1.5/1C-HH |
| DH2041 |
3/2D-HH |
| EH3041 |
4/3E-HH |
| FH4041 |
6/4F-HH |
| FH6041 |
6S-H, 8/6S-H |
| DG4041 |
6/4D-G, 6/4E-G |
| EG6041 |
8/6E-G |
| FG8041 |
10/8F-G, 10/8S-G |
| FG10041 |
12/10G-G |
| GG12041 |
14/12G-G |
| FGH8041 |
10/8F-GH |
| GGH10041 |
12/10G-GH |
| TG14041 |
16/14TU-GH |
| SP4041 |
40PV-SP |
| SP65041 |
65QV-SP |
| SP10041 |
100RV-SP |
| SP15041 |
150SV-SP |
| SP20041 |
200SV-SP |
| SP25041 |
250TV-SP |
| SP30041 |
300TV-SP |
Frame Plate Liner (FPL) Insert Material
Wear/ Erosion Resistant Cast Alloy
1. A05 is a wear resistant white iron that offers excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of alloy A05 is provided by the presence of hard carbides within its micro-structure. Alloy A05 is particularly suited to applications where mild corrosion resistance, as well as erosion resistance is required.
2. A07 Marten-sic white iron with moderate erosion resistance.
3. A49 is suitable for low pH corrosion duties, where erosive wear is also a problem.
The alloy is particularly suitable for Flue Gas Desulphu-rization(FGD) and other corrosive applications,
where the pH is less than 4. The alloy can also be used in other mildly acidic environments.
A49 has an erosion resistance similar to that of Ni-Hard 1.
Rubber:
• RU08 is a black natural rubber, of low to medium hardness. RU08 is used for impellers where superior erosive resistance is required in fine particle slurries.
• RU26 is a black, soft natural rubber. RU26 is used for lines where superior erosion resistance to all other materials in fine particle slurry applications.
• RU33 is a premium grade black natural rubber of low hardness and is used for cyclone and pump liners and impellers where its superior physical properties give increased cut resistance to hard, sharp slurries.
• RU55 is premium grade black natural rubber, it is suitable for severe erosive fine particle slurries.
Polyurethane:
• PU01 is an erosion resistant material that performs well in elastomer applications where 'tramp' is a problem. This is attributed to the high tear and tensile strength of PU01. However, its general erosion resistance is inferior to that of natural rubber.
Company Profile
Company Profile
Naipu Pump is a professional global manufacturer of industrial pumps with more than 30 years production experience. Mainly produces various types of slurry pumps, sewage pumps, sump pumps, high chromium alloy accessories and various OEM and ODM production.Already passed the quality certification ISO9001, environmental certification ISO14001, and health Certification ISO45001. The company covers an area of more than 60,000 square meters, has 150 skilled workers, 50 professional and technical service personnel, and its products are sold all over the world. The annual output is 8,000 tons of accessories, 8,000 pumps, and annual sales of 20 million US dollars.
After years of sustainable development, Naipu has gradually upgraded to an environmentally friendly factory, with environmentally friendly resin sand machine modeling, high-efficiency casting electric furnace, heat treatment, and rough sand cleaning system. Every molding has undergone strict inspection to ensure the full brushing of the protective coating, which is the prerequisite to ensure the production of qualified castings.After passing the environmental and health certification, the workers' working environment has been improved.
Our spare parts inventory is very sufficient to ensure that each customer can replace the spare parts in the first time, and will receive sufficient size inspection and packaging before shipment.
Our Products are suitable for all slurry pumping applications - chemical, mineral processing, power generation and general industry.
NaiPu Main products
1. NAH , HH L Horizontal Slurry Pump
2. SP Vertical sump pump
3. ZJQ Submersible slurry pump
4. G Horizontal sand gravel pump
5. ZJQ Submersible sand pump
6. WS Dredging pump
7. AF Vertical Froth Pump
8 .AHF Horizontal Froth Pump
9. TL(R) Desulphurization Pump
10.Clean Water Pump
11. OEM Casting machinery wear parts
| NHA series |
L(R) ,M |
HH |
SP(R) |
G |
AF Series |
| 1.5/1B-HA(R) |
20A-L |
1.5/1 C-HH |
40PV-SP(R) |
6/4D-G |
2QV-AF |
| 2/1.5B-HA(R) |
50B-L(R) |
3/2D-HH |
65QV-SP(R) |
8/6E-G |
3QV-AF |
| 3/2C-HA(R) |
75C-L |
4/3E-HH |
100RV-SP(R) |
10/8F-G |
6SV-AF |
| 4/3C-HA(R) |
100 D-L |
4/3X-HH |
150SV-SP(R) |
10/8S-G |
8SV-AF |
| 6/4D-HA(R) |
150E-L |
6/4F-HH |
200SV-SP |
12/10G-G |
2C-HAF |
| 6/4E-HA(R) |
300S-L |
6/4X-HH |
250TV-SP |
14/12G-G |
3C-HAF |
| 8/6E-HA(R) |
10/8 R-M |
6S-H |
|
14/12T-G |
4D-HAF |
| 8/6R-HA(R) |
10/8 E-M |
8/6S-H |
|
16/14 G-G |
6E-HAF |
| 10/8F-HA(R) |
|
8/6X-H |
|
16/14TU-GH |
|
| 10/8X-HA(R) |
|
6S-HP |
|
16/14H-GH |
|
| 12/10ST-HA(R) |
|
8/6S-HP |
|
18/16G-G |
|
| 14/12ST-HA(R) |
|
8/6X-HP |
|
18/16 TU-GH |
|
| 16/14TU-HA(R) |
|
|
|
|
|
| 20/18G(TU)-HA(R) |
|
|
|
|
|
Spare Parts
Impeller, Volute Liner, Casing, ThroatBush, Frame Plate Liner Insert, Cover Plate, Frame Plate, Pump Liner Expeller, Expeller Ring, Stuffing Box, Expeller, Pump Shaft, shaft sleeve, Shaft Spacer, Bearing Assembly, Base, Stuffing Box, Gland Assembly, Bearing Housing, Lantern Ring, pump discharge pipe, flange, and so on.
WorkShop
Shijiazhuang NaiPu Pump Co., Ltd have own Foundry workshop, Machining Workshop, Assembly workshop, Heat treatment equipment and advanced test equipment.
Welcome to visit our factory!
FAQ
1. What Products does naipu pump mainly produce?
Naipu mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is Naipu direct factory or trader?
Yes, Naipu is direct Pump Manufacturer, have own foundry workshop, Machining Workshop, Heat treatment equipment and Assembly workshop, also advanced quality inspection equipment.(Hardness,Spectrometer,Ultrosonic , Penetration , and pump performance test station)
Welcome to visit Naipu factory anytime.
3. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow rate, head, and SG, Corrosive or not? The more detailed the better.
4.
Are these pump and parts interchangeable with famous brand Pump ?
Yes, Our pump and parts can be 100% interchange with other famous brand , do not need change the pump .
5, What about the warranty period and life time?
Warranty time is 1 year . As long as It is quality problem, we can be responsible at any time.
About lifetime of Wear parts, It is hard to say the exact time ,Lifetime is related to many factors, such as particle size, hardness, shape, concentration, corrosion, etc
3. The Min MQQ
The MQQ is one pcs spare parts or Pump.
Welcome to Contact Me
ShiJiaZhuang NaiPu Pump Co., Ltd
Contact person: Kitty Liu
Shijiazhuang, Headquarters
Add.: No. 368, Xinshi North Road, Shijiazhuang, Hebei Province, China
Related Slurry Sand Pumps
Related pump
Click for more information!
Horizontal Slurry Pump
Main Pump Model: 1.5/1,2/1.5,3/2,4/3,6/4,8/6,10/8,12/10,14/12,
18/16,20/18
Discharge Diameters 1″ to 18″ (25mm to 450mm)
Pump Heads Max to 390ft (118m)
Flow Rates Max to 24000 gpm (5400m3/h)
Horizontal slurry pumps are cantilevered , horizontal, centrifugal double casing slurry pumps.
They are designed for hyper heavy duty applications such as mill discharge, process plant, coal washing, dregding sands, tailings and high pressure pipelines, as well as other specialty applications
Typical Application
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling
Vertical Slurry Pump
Main Pump Model:40PV-SP 65QV-SP 100RV-SP 150SV-SP 200SV-SP 250SV-SP
Discharge Diameters 1.5″ to 10″ (40mm to 250mm)
Pump Heads Max to 160ft (50m)
Flow Rates Max to 6,000gpm (1,350m3/h)
NaiPu-ZJL(SP)Series slurry pumps are designed for handling abrasive and corrosive slurries whilst submerged in sumps or pit. The pump has no shaft seal, easy to maintenance and cost less. Hard metal and rubber parts are optional for different applications and interchangeable. Suit for most applications where sump slurry pumps are needed.
Typical Application
Sump drainage washdown
Floor drainage
Mill sumps
Carbon transfer
Monitoring
Magnetite mixing
Gravel Sand Pump
Main Model :6/4D-G 8/6E-G 10/8F-G 10/8S-G 12/10G-G 14/12G-G 10/8S-GH 10/8F-GH 12/10G-GH 18/16 T-G
Discharge Size: 100-400mm(4inch to 16inch)
Capacity: 180-4000 (m³/h)
Head: 25-76(m)
G(H) Gravel Sand Pump are designed for continuous pumping of highly abrasive slurries that containing large particles which other Atlas pumps can not handle, Large passage inside casing make
it the best choice for gravel, dredging and other applications where large particles needed to be handled, especially for big flow, high concentration, high head media. Low NPSH requirement and robust design ensures long life under severe duties.
Typical Application
Slag Granulation
Suction Hopper Dredging
Dredging
Barge Loading
Sand Reclamation
ZJQ Submersible slurry pump
Main Model: ZJQ20-30-5.5,ZJQ 100-10-7.5 ,ZJQ50-21-11,ZJQ50-26-15,ZJQ 100-25-22,ZJQ500-20-75,ZJQ2000-35-315, etc
Discharge Size: 80mm-400mm
Capacity: 25m3/h-2000m3/h
Head: 12m-60m
Naipu® NP-ZJQsubmersible Slurry motor pump is a kind of hydraulic mechanism which motor connects directly with pump.the pump adopts excellent material, advanced structure, and it is with wide flowing passage & strong delivery ability. The hydraulic parts are wear-resistant. The pump is yet completed with control unit.
Typical Applications---
Delivering Liquid Sand, Coal Cinder Solid
Clearing The Mud In Lake, River, Sea
Drging Widening Channel
Froth Slurry Pump
Main Pump Model:2QV-AF(R) 3QV-AF(R) 6SV-AF(R) 8SV-AF(R) ,2CAHF, 3DAHF, 6EAHF
Discharge Size: 50mm-150mm
Capacity: 7.2m3/h-330m3/h
Head: 5m-30m
Naipu® NP-AFfroth pumps are of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. They have a vertical shaft configuration, and comprise a hopper, with vertical Bearing Assembly, and Type'NP-HA' pump wet-end. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casing liners and Impellers.
Typical Applications---
Minerals Flotation Processing
Handle Frothy Slurries
Audited Supplier 
){kind=link}
){kind=link}