| Max.Head: | 50-80m |
|---|---|
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Impeller Number: | Single-Stage Pump |
| Working Pressure: | Low Pressure Pump |
| Influent Type of Impeller: | Single Suction Pump |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Type 8/6 E Slurry Pump are cantilevered, horizontal, centrifugal slurry pump. They are designed for the handing high density slurries in the metallurgical, mining , coal, power, building material and other industrial department etc.
The frame plates liner and impeller for type 8/6 E Slurry Pump have replaceable wear-resistant metal liners or rubber liners.
The shaft seals for 8/6 E Slurry Pump may be adoptable of gland seal , expeller seal or Mechanical seal . The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Bearing assembly use cylindrical structure, which helps adjust the space between impeller and cover plate liner easily, and being removed completely when being repaired. Bearings use grease lubrication. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency, the pump of this type may be installed in multistage series to meet the delivery for long distance.
Application:
8/6 E Slurry Pump are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling
Type Notation :
8/6 NP
8------ Suction Diameter(inch)
6------- Discharge Diameter(inch)
NP-------- ShiJiaZhuang NaiPu Pump Co.,Ltd
NP SLURRY PUMP PERFORMANCE PARAMETERS
| Type | Allowable Mating Max. Power(Kw) | Clear Water Performance | Impeller | |||||
| Capacity/Q m³/hr | Head/m | Speed/rpm | Max Efficiency/% | NPSH/m | Nos of Vane | Impeller Diameter/mm | ||
| 1.5X1-NP | 15 | 12.6--28.8 | 6--68 | 1200--3800 | 40 | 2--4 | 5 | 152 |
| 2X1.5-NP | 15 | 32.4--72 | 6--58 | 1200--3200 | 45 | 3.5--8 | 5 | 184 |
| 3X2-NP | 30 | 39.6--86.4 | 12--64 | 1300--2700 | 55 | 4--6 | 5 | 214 |
| 4X3-NP | 30 | 86.4--198 | 9--52 | 1000--2200 | 71 | 4--6 | 5 | 245 |
| 6X4-NP | 60 | 162--360 | 12--56 | 800--1550 | 65 | 5--8 | 5 | 365 |
| 8X6-NP | 300 | 360--828 | 10--61 | 500--1140 | 72 | 2--9 | 5 | 510 |
| 10X8-NP | 560 | 612--1368 | 11--61 | 400--850 | 71 | 4--10 | 5 | 686 |
| 12X10-NP | 560 | 936--1980 | 7--68 | 300--800 | 82 | 6 | 5 | 762 |
| 14X12-NP | 560 | 1260--2772 | 13--63 | 300--600 | 77 | 3--10 | 5 | 965 |
| 16X14-NP | 1200 | 1368--3060 | 11--63 | 250--550 | 79 | 4--10 | 5 | 1067 |
| 18X16-NP | 1200 | 2520--5400 | 13--57 | 200--400 | 85 | 5--10 | 5 | 1370 |
8/6 E Slurry Pump Parts
| Pump Model | Slurry Pump Parts Name | Parts Code | Material |
| 150ZJ(8/6E ) | Oil Cup Base | D138 | 20 |
| O Ring | F064 | NBR | |
| Lip Seal Gland | E241 | HT200 | |
| O Ring | E109 | NBR | |
| Frame Plate | EAM6032 | HT200 | |
| Frame Plate QT | EAM6032 | QT500-7 | |
| Cover Plate | F6013 | HT200 | |
| Cover Plate QT | F6013 | QT500-7 | |
| Impeller A05 | F6147 | KmTBCr26 | |
| Impeller Rubber | F6147R | NATURE RUBBER | |
| Volute Liner A05 | F6110 | KmTBCr26 | |
| Cover Plate Liner | F6018 | NATURE RUBBER | |
| Frame Plate Liner | F6036 | NATURE RUBBER | |
| Throat Bush A05 | F6083 | A05 | |
| Throat Bush Rubber | F6083 | R55 | |
| Frame Plate Liner Insert A05 | F6041 | A05 | |
| Shaft Sleeve | E075 | 3cr13 | |
| Shaft Spacer | EAM117 | 4cr13 | |
| Stuffing Box | EAM078 | HT200 | |
| Stuffing Box | EAM078 | A05 | |
| Expeller A05 | EAM028 | A05 | |
| Expeller Ring | EAM029 | A05 | |
| Base | E003 | HT200 | |
| Lantern Ring | E063 | 1Cr18Ni9Ti | |
| Lantern Restrictor | E118 | 1Cr18Ni9Ti | |
| Neck Ring | E067 | 1Cr18Ni9Ti | |
| Gland Assembly | E044 | HT200 | |
| Keeper Plate | F6081 | 20 | |
| Cover Plate Bolt | F6015M | 45 | |
| Expeller Ring /Stuffing Box Seal Seal Ring |
F122 | ||
| O Ring | EP122 | ||
| Intake Joint | F6060 | ||
| Discharge Joint | F6132XLP | ||
| O Ring | F109 | ||
| Volute Liner Seal | F8124 | ||
| Bearing Housing | E004M | HT200 | |
| End Cover | E024 | HT200 | |
| Grease Retainer | E046 | HT200 | |
| Labyrinth | E062 | HT200 | |
| Shaft | EAM073M | 45 | |
| Bearing Assembly | EAM005M | ||
| Lip seals | E090 | ||
| Oil Seal | E089-10 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}