| Max.Head: | >150m |
|---|---|
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Impeller Number: | Single-Stage Pump |
| Working Pressure: | High Pressure Pump |
| Influent Type of Impeller: | Single Suction Pump |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
NP-HA SLURRY PUMP PERFORMANCE PARAMETERS
| Type | Allowable Mating Max. Power(Kw) | Clear Water Performance | Impeller | |||||
| Capacity/Q m³/hr | Head/m | Speed/rpm | Max Efficiency/% | NPSH/m | Nos of Vane | Impeller Diameter/mm | ||
| 1.5X1-NP | 15 | 12.6--28.8 | 6--68 | 1200--3800 | 40 | 2--4 | 5 | 152 |
| 2X1.5-NP | 15 | 32.4--72 | 6--58 | 1200--3200 | 45 | 3.5--8 | 5 | 184 |
| 3X2-NP | 30 | 39.6--86.4 | 12--64 | 1300--2700 | 55 | 4--6 | 5 | 214 |
| 4X3-NP | 30 | 86.4--198 | 9--52 | 1000--2200 | 71 | 4--6 | 5 | 245 |
| 6X4-NP | 60 | 162--360 | 12--56 | 800--1550 | 65 | 5--8 | 5 | 365 |
| 8X6-NP | 300 | 360--828 | 10--61 | 500--1140 | 72 | 2--9 | 5 | 510 |
| 10X8-NP | 560 | 612--1368 | 11--61 | 400--850 | 71 | 4--10 | 5 | 686 |
| 12X10-NP | 560 | 936--1980 | 7--68 | 300--800 | 82 | 6 | 5 | 762 |
| 14X12-NP | 560 | 1260--2772 | 13--63 | 300--600 | 77 | 3--10 | 5 | 965 |
| 16X14-NP | 1200 | 1368--3060 | 11--63 | 250--550 | 79 | 4--10 | 5 | 1067 |
| 18X16-NP | 1200 | 2520--5400 | 13--57 | 200--400 | 85 | 5--10 | 5 | 1370 |
naipu - HA Series hard metal and rubber heavy duty slurry pumps are designed for the most difficult pumping applications. They handle highly abrasive, high density and erosive slurries.
The Slurry Pump are cantilevered, horizontal, centrifugal slurry pump. They are designed for the handing high density slurries in the metallurgical, mining , coal, power, building material and other industrial department etc.
The frame plates liner and impeller for type ZJR , ZJ(M) pumps have replaceable wear-resistant metal liners or rubber liners.
The shaft seals for type ZJ(R),ZJM, and ZJH Pump may be adoptable of gland seal , expeller seal or Mechanical seal .
The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Bearing assembly use cylindrical structure, which helps adjust the space between impeller and cover plate liner easily, and being removed completely when being repaired. Bearings use grease lubrication. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
Wide performance, good NPSH and high efficiency, the pump of this type may be installed in multistage series to meet the delivery for long distance.
Application:
The pumps are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling
Construction
| Pump Model | Parts Name | Parts Code | Material |
| 250ZJ(12/10ST-HA) | Impeller Release Collar | S239M | CS1 |
| Volute Liner Seal | G10124 | Nature Rubber | |
| Frame Plate QT | G10032 | QT500-7 | |
| Cover Plate QT | G10013 | QT500-7 | |
| Impeller A05 | G10147 | A05 | |
| Volute A05 | G10110 | A05 | |
| Throat Bush A05 | G10083 | A05 | |
| Frame Plate Liner Insert A05 | G10041 | A05 | |
| Long Shaft Sleeve | SH076 | CS1 | |
| Short Shaft Sleeve | SH075 | CS1 | |
| Stuffing Box | G078 | HT200 | |
| Stuffing Box | G078 | A05 | |
| Expeller | SH028 | A05 | |
| Expeller Ring | G029 | A05 | |
| Base QT | ST003M | QT500-7 | |
| Lantern Ring | G063 | AtNi14Cu6 | |
| Lantern Restrictor | G118 | AtNi14Cu6 | |
| Neck Ring | G067 | 1Cr18Ni9Ti | |
| Gland Assembly | G044 | HT200 | |
| Cover Plate Bolts | G10015M | 45 | |
| O Ring | CSC210 | NBR | |
| O Ring | G122 | NBR | |
| Intake Joint | G10060 | NBR | |
| Discharge Joint | G10132XLP | Nature Rubber | |
| Shim | S025 | Rubber | |
| Grease Cup Adaptor | G138 | 20 | |
| Bearing Housing | S004M | QT500-7 | |
| End Cover | S024 | HT200 | |
| Labyrinth (for Pump) | S062 | QT500-7 | |
| Labyrith(for Motor ) | S062DM | QT500-7 | |
| Shaft | SH073M | 45 | |
| Bearing Assembly | SH005M |
Main Pump Spare Parts
Naipu Pump VS others Factory Pump
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}