High Chrome Slurry Graval Mud Sand Pump Volute Liner
Naipu® factory of slurry pump , gravel sand pump , dredging pump and spare parts.
The Pumps are widely used in in metallurgy, mining, Nonmetallic Mining, Coal, Energy
resources, Sand mining, Dredging, Environmental protection, Petrochemical engineering, Flue gas desulfurization and other industrial departments.
Slurry Pump Volute Liner Picture
The Main Slurry Pump Code :
Volute Liner |
Replacement Slurry Pump Model |
B1110NA |
1.5/1B-AH |
B15110NA |
2/1.5B-AH |
C2110NA |
3/2C-AH |
D3110 |
4/3C-AH, 4/3D-AH |
E4110 |
6/4D-AH, 6/4E-AH |
F6110 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
G8110 |
10/8ST-AH |
G10110 |
12/10ST-AH |
G12110 |
14/12F-AH14/12ST-AH |
H14110 |
16/14TU-AH |
AL2110 |
20A-L |
BL5110 |
50B-L |
CL75110NA |
75C-L |
DL10110 |
100D-L |
EL15110 |
150E-L |
SL30110 |
300S-L |
F8110 |
10/8E-M, 10/8F-M, 10/8R-M |
F10010 |
12/10F-M, 12/10R-M |
CH1110NA |
1.5/1C-HH |
DH2110 |
3/2D-HH |
EH3110 |
4/3E-HH |
FH4110 |
6/4F-HH |
FH6110 |
6S-H, 8/6S-H |
DG4131 |
6/4D-G, 6/4E-G |
EG6131 |
8/6E-G |
FG8131 |
10/8F-G, 10/8S-G |
FG10131 |
12/10G-G |
GG12131 |
14/12G-G |
FGH8131 |
10/8F-GH |
GGH10131 |
12/10G-GH |
TG14131 |
16/14TU-GH |
SP4092 |
40PV-SP |
SP65092 |
65QV-SP |
SP10092 |
100RV-SP |
SP15092 |
150SV-SP |
SP20092 |
200SV-SP |
SP25092 |
250TV-SP |
SP30092 |
300TV-SP |
SP30092 |
300TV-SP |
Material
Code |
Material # |
Hardness HRC |
Performance |
Application |
A05 |
KmTBCr26 |
≥56 |
Ranks second only to A07 in abrasion-resistant performance; fair corrosion-resistant performance. |
High impact load abrasion condition; PH rate ranging from 5 to 12 |
A07 |
KmTBCr15Mo3 |
≥59 |
Best abrasion-resistant performance; corrosion-resistant performance is inferior to A05 |
High impact load abrasion condition |
A11 |
KmTBCrMnMo3 |
38-42 |
Mild corrosion-resistant; lower hardness; drilling and tapping operations are applicable. |
Fine particles with light abrasion. |
A33 |
|
≥35 |
Abrasion-resistant performance is close to A03; fair corrosion-resistant performance |
Oxide slurry with PH rate no less than 1, like phosphor-gypsum in phosphate fertilizer plant, nitric acid, sulph-oacid and phosphoric acid, etc. |
A49 |
|
≥43 |
Fair abrasion-resistant performance, close to A03; fair corrosion-resistant performance in media with lower PH rate. |
Corrosion conditions with low PH rate, especially for flue gas and FGD devices for media of PH≥4; general suitable for lower acid condition. |
A12 |
|
≥62 |
Higher abrasion-resistant performance than A05; fair corrosion-resistant performance; suitable for media with PH rate is 6-16, where A05 is not suitable. |
High abrasive slurry with fine particles. |
A61 |
|
63-68 |
Optimized abrasion-resistant performance than A12 |
High abrasive slurry with fine particles. |
Slurry Pump Spare Parts.
We also can supply OEM (Original Equipment Manufacture) Service
Main Slurry Pump Parts : Impeller , Volute Liner , Casing , ThroatBush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange , and so on.
Naipu Main Pump
Main Pump Models
AH series |
L(R) ,M |
HH |
SP(R) |
G |
1.5/1B-AH(R) |
20A-L |
1.5/1 C-HH |
40PV-SP(R) |
6/4D-G |
2/1.5B-AH(R) |
50B-L(R) |
3/2D-HH |
65QV-SP(R) |
8/6E-G |
3/2C-AH(R) |
75C-L |
4/3E-HH |
100RV-SP(R) |
10/8F-G |
4/3C-AH(R) |
100 D-L |
4/3X-HH |
150SV-SP(R) |
10/8S-G |
6/4D-AH(R) |
150E-L |
6/4F-HH |
200SV-SP |
12/10G-G |
6/4E-AH(R) |
300S-L |
6/4X-HH |
250TV-SP |
14/12G-G |
8/6E-AH(R) |
10/8 R-M |
6S-H |
|
14/12T-G |
8/6R-AH(R) |
10/8 E-M |
8/6S-H |
|
|
10/8F-AH(R) |
|
8/6X-H |
|
|
10/8X-AH(R) |
|
6S-HP |
|
|
12/10ST-AH(R) |
|
8/6S-HP |
|
|
14/12ST-AH(R) |
|
8/6X-HP |
|
|
16/14TU-AH(R) |
|
|
|
|
Welcome to contact us
ShiJiaZhuang NaiPu Pump Co.,Ltd
Contact person :Kitty Liu
Mobile :+86-13032609126
Welcome to contact me for slurry pump catalogue and price list .