HA, M , HH, L Mining Double Casing Horizontal Slurry Pumps
Naipu is direct manufacturers of slurry pump , gravel sand pump , dredging pump and spare parts.with 30 years's production experience.
Naipu own mould workshop,foundry workshop, machining workshop, assembly workshop, heat treatment equipment and advanced test equipment.
All pump and parts have passed ISO9001:2015 quality certification.
In addition , Naipu can provide OEM Service
NAH HH M Centrifugal Horizontal Slurry Pumps
Horizontal Heavy Duty Slurry Pump NAH model
1.5/1B-NAH 2/1.5B-NAH 3/2CN-AH 4/3C-NAH 4/3D-NAH 6/4D-NAH 6/4E-NAH 8/6E-NAH 8/6F-NAH 8/6R-NAH 10/8ST-NAH 10/8F-NAH 12/10ST-NAH 12/10F-NAH 14/12ST-NAH 14/12G-NAH 14/12F-NAH 16/14TU-NAH 20/18TV-NAH
Metal Liner High Head Horizontal slurry pump HH TYPE
1.5/1C-HH 3/2D-HH 4/3E-HH 6/4F-HH 6/4x- HH 6S-H 8/6S-H 8/6S-HP
Metal Liner (Rubber Liner ) Slurry Pump L TYPE
20A-L 50B-L 50B-LR 75C-L 100D-L 150E-L 300S-L 450ST-L 550TU-L
Feature and Application:
Naipu-ZJ(NAH) hard metal/rubber heavy duty slurry pumps are cantilevered,horizontal,centrifugal pumps , they are designed for the most difficult pumping applications for highly abrasive , high density or erosive slurries.
Naipu® HH series were designed to produce high heads per stage at high pressures. commonly used for long distance transport lines, the Naipu® NHH lines can often satisfy application duties with a single pump where others require multiple pumps.
Naipu® NP-L series Horizontal slurry pump for medium to lower heads suitable for delivery lower abrasive,low density slurries. It incorporates the same design points of the NP-NAH(R) and plus higher efficiency impellers at an attractive initial cost.
Different shaft seal types are available to suit every requirement, including gland packing seal, expeller seal and mechanical seal.
Main Design Features :
1)Double casings design centrifugal slurry pump, wide passage for solids;
2)Bearing assembly & frame: Both standard & high capacity typies available. A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy duty roller bearing are housed in a removable bearing cartridge. Pump body is fastened with the frame by minimum bolts. Impeller adjustment is provided in a convenient position below the bearing assembly;
3)Impeller & liner material: high chrome white iron, rubber, etc;
4)High efficiency impeller available: up to 86.5% for certain type;
5)Interchangeable wet parts material: High chrome alloy metal: PH: 5-12; natural rubber: PH: 4-12;
6)Shaft seal: Packing seal, centrifugal seal, mechanical seal;
7)Discharge branch: 8 positions in each 45°;
8) Driving type: V-belt, flexible coupling, gearbox, hydraulic coupler;
Type Notation
8X6-NP-NAH
8---Inlet size 8 inch
6-- Outlet size 6 inch
NP-Shijiazhuang Naipu pump
NAH-- Naipu Horizontal Slurry Pump
Horizontal Heavy duty Slurry Pump Performance Parameters
| Type |
Allowable Mating Max. Power(Kw) |
|
Clear Water Performance |
Impeller |
| Material |
Capacity/Q m³/hr |
Head/m |
peed
rpm |
Max Eff% |
NPSH/m |
Nos of Vane |
Impeller Diameter/
mm |
| 1.5/1-NP-NAH |
15 |
M |
12.6--28.8 |
6--68 |
1200--3800 |
40 |
2--4 |
5 |
152 |
| R |
10.8-25.2 |
7-52 |
1400-3400 |
35 |
3 |
| 2X1.5-NP-NAH |
15 |
M |
32.4--72 |
6--58 |
1200--3200 |
45 |
3.5--8 |
5 |
184 |
| R |
25.2-54 |
5.5-41 |
1000-2600 |
50 |
2.5-5 |
|
178 |
| 3X2-NP-NAH |
30 |
M |
39.6--86.4 |
12--64 |
1300--2700 |
55 |
4--6 |
5 |
214 |
| R |
36-75.6 |
13-39 |
1300-2100 |
55 |
2-4 |
213 |
| 4X3-NP-NAH |
30 |
M |
86.4--198 |
9--52 |
1000--2200 |
71 |
4--6 |
5 |
245 |
| R |
79.2-180 |
5-34.5 |
800-1800 |
59 |
3-5 |
| 6X4-NP-NAH |
60 |
M |
162--360 |
12--56 |
800--1550 |
65 |
5--8 |
5 |
365 |
| R |
144-324 |
12-45 |
800-1350 |
65 |
3-5 |
| 8X6-NP-NAH |
300 |
M |
360--828 |
10--61 |
500--1140 |
72 |
2--9 |
5 |
510 |
| R |
324-720 |
7-49 |
400-1000 |
65 |
5-10 |
| 10X8-NP-NAH |
560 |
M |
612--1368 |
11--61 |
400--850 |
71 |
4--10 |
5 |
686 |
| R |
540-1188 |
12-50 |
400-750 |
75 |
4-12 |
|
| 12X10-NP-NAH |
560 |
M |
936--1980 |
7--68 |
300--800 |
82 |
6 |
5 |
762 |
| R |
720-1620 |
7-45 |
300-650 |
80 |
2.5-7.5 |
| 14X12-NP-NAH |
560 |
M |
1260--2772 |
13--63 |
300--600 |
77 |
3--10 |
5 |
965 |
| R |
1152-2520 |
13-44 |
300-500 |
79 |
3-8 |
| 16X14-NP-NAH |
1200 |
M |
1368--3060 |
11--63 |
250--550 |
79 |
4--10 |
5 |
1067 |
| 20X18-NP-NAH |
1200 |
M |
2520--5400 |
13--57 |
200--400 |
85 |
5--10 |
5 |
1370 |
High Head Horizontal slurry pump HH TYPE Performance Parameters
| Type |
Allowable Mating Max. Power(Kw) |
Clear Water Performance |
Impeller |
| Capacity/Q m³/hr |
Head/m |
Speed/rpm |
Max Efficiency/% |
NPSH/m |
Nos of Vanes |
Impeller Diameter/mm |
| 1.5/1NP-HH |
30 |
16.2--34.2 |
25-92 |
1400--2200 |
20 |
2--5.5 |
5 |
330 |
| 3/2NP-HH |
60 |
68.4--136.8 |
25-87 |
850--1400 |
47 |
3-7.5 |
5 |
457 |
| 4/3NP-HH |
120 |
126-252 |
12-97 |
600-1400 |
50 |
2-5 |
5 |
508 |
| 6/4NP-HH |
560 |
324-720 |
30-118 |
600-1000 |
64 |
3-8 |
5 |
711 |
| 8/6NP-HH |
560 |
468-1008 |
20-94 |
500--1000 |
65 |
4-12 |
5 |
711 |
Metal Liner (Rubber Liner ) Low Abrasive Slurry Pump L TYPE Performance Parameters
| Type |
Allowable Mating Max. Power(Kw) |
Clear Water Performance |
Impeller |
| Capacity/Q m³/hr |
Head/m |
Speed/rpm |
Max Efficiency/% |
NPSH/m |
Nos of Vane |
Impeller Diameter/mm |
| 20A--NP-L |
7.5 |
2.34-10.8 |
6--37 |
1400--3000 |
30 |
3-7 |
4 |
152.4 |
| 50B-NP-L |
15 |
16.2--76 |
9--44 |
1400--2800 |
55 |
3.5--8 |
5 |
190 |
| 75C-NP-L |
30 |
18-151 |
4--45 |
900--2400 |
57 |
3--6 |
4 |
229 |
| 100D-NP-L |
60 |
50-252 |
7-46 |
800--1800 |
60 |
2--3.5 |
4 |
305 |
| 150E-NP-L |
120 |
115--486 |
12-51.5 |
800--1500 |
65 |
2--6 |
4 |
381 |
| 200E-NP-L |
120 |
234--910 |
9.5--40 |
600--1100 |
64 |
3-6 |
4 |
457 |
| 250F-NP-L |
120 |
396--1425 |
8--30 |
500--800 |
77 |
2--10 |
5 |
550 |
| 300S-NP-L |
560 |
468--2538 |
8--60 |
400--950 |
79 |
2-10 |
5 |
653 |
| 350S-NP-L |
560 |
650--2800 |
10--59 |
400--840 |
81 |
3--10 |
5 |
736 |
| 400ST-NP-L |
560 |
720--3312 |
7--51 |
300--700 |
80 |
2--10 |
5 |
825 |
| 450ST-NP-L |
560 |
1008--4356 |
9--48 |
300--600 |
80 |
2--9 |
5 |
933 |
| 550TU-NP-L |
1200 |
1980-7920 |
10-50 |
250-475 |
86 |
4-10 |
5 |
1213 |
Select chart of AH horizontal slurry pump
Typical Applications---
The parts are widely used in Main Applications: Heavy Mining | Mineral Processing | Sand and Gravel |Coal Prep | Cyclone Feeds | Aggregate Processing | Fine Primary Mill Grinding | Chemical Slurry Service | Tailings | Secondary Grinding | Industrial Processing | Pulp And Paper | Food Processing | Cracking Operations | Ash Handling | Pipeline Transport | High Velocity Hydraulic Transport |Food Processing | Explosive Sludge In Metal Smelting | River And Pond Dredging | Heavy Refuse Removal | Larger Particle Or Low NPSHA Applications | Continuous (Snore) Sump Pump Operation | Abrasive Slurries | High Density Slurries | Large Particle Slurries | Sump Drainage | Wash down | Floor Drainage | Mixing | Iron Ore | Cooper | Diamond | Alumina | Coal | Gold | Kaolin | Phosphorite | Steel | Palm | Suger | Chemical | Power | FGD | Frac Sand Blending | Construction | City Sewage | etc.
Pump Structure
The horizontal slurry pumps are double casing pump withinterchangeable metal or rubber liner.
Parts Material:
| |
LINERS |
IMPELLERS |
CASING |
BASE |
EXPELLER |
EXPELLER RING |
SHAFT SLEEVE |
SEALS |
| Standard |
Chrome Alloy
Natural Rubber |
Chrome Alloy
Natural Rubber |
SG Iron |
SG Iron |
Chrome Alloy
or
SG Iron |
Chrome Alloy
or
SG Iron |
SG Iron |
Rubber
and
Nitrile |
| Options |
Ferralium
Hastelloy C
316 SS
W151
Polyurethane
Neoprene
Butyl
Viton
Nitrile
EPDM
Hypalon |
Ferralium
Hastelloy C
316 SS
W151
Polyurethane
Neoprene
Butyl
Nitrile
Hypalon |
SG Iron
Various grades |
MS
Fabricated
Cast Iron |
NI Resist
Ferralium
Hastelloy C
Polyurethane
316 SS
W151 |
NI Resist
Ferralium
Hastelloy C
316 SS
Rubber
W151
Polyurethane
Neoprene
Butyl
Nitrile |
EN56C
Ferralium
Hastelloy C
Titanium
316 SS
304 SS |
Ceramic
Stellite
Chrome Oxide
Nordel
Neoprene
Viton |
Drive Type
Slurry pump drive type: CV, CVLz, ZVz, CRz, CLz, DCz
Related pump
Vertical Slurry Pump
Main Pump Model:40PV-SP 65QV-SP 100RV-SP 150SV-SP 200SV-SP 250SV-SP
Discharge Diameters 1.5″ to 10″ (40mm to 250mm)
Pump Heads Max to 160ft (50m)
Flow Rates Max to 6,000gpm (1,350m3/h)
NaiPu-ZJL(SP)Series slurry pumps are designed for handling abrasive and corrosive slurries whilst submerged in sumps or pit. The pump has no shaft seal, easy to maintenance and cost less. Hard metal and rubber parts are optional for different applications and interchangeable. Suit for most applications where sump slurry pumps are needed.
Typical Application
Sump drainage washdown
Floor drainage
Mill sumps
Carbon transfer
Monitoring
Magnetite mixing
Gravel Sand Pump
Main Model :6/4D-G 8/6E-G 10/8F-G 10/8S-G 12/10G-G 14/12G-G 10/8S-GH 10/8F-GH 12/10G-GH 18/16 T-G
Discharge Size: 100-400mm(4inch to 16inch)
Capacity: 180-4000 (m³/h)
Head: 25-76(m)
G(H) Gravel Sand Pump are designed for continuous pumping of highly abrasive slurries that containing large particles which other Atlas pumps can not handle, Large passage inside casing make
it the best choice for gravel, dredging and other applications where large particles needed to be handled, especially for big flow, high concentration, high head media. Low NPSH requirement and robust design ensures long life under severe duties.
Typical Application
Slag Granulation
Suction Hopper Dredging
Dredging
Barge Loading
Sand Reclamation
ZJQ Submersible slurry pump
Main Model: ZJQ20-30-5.5,ZJQ 100-10-7.5 ,ZJQ50-21-11,ZJQ50-26-15,ZJQ 100-25-22,ZJQ500-20-75,ZJQ2000-35-315, etc
Discharge Size: 80mm-400mm
Capacity: 25m3/h-2000m3/h
Head: 12m-60m
Naipu® NP-ZJQsubmersible Slurry motor pump is a kind of hydraulic mechanism which motor connects directly with pump.the pump adopts excellent material, advanced structure, and it is with wide flowing passage & strong delivery ability. The hydraulic parts are wear-resistant. The pump is yet completed with control unit.
Typical Applications---
Delivering Liquid Sand, Coal Cinder Solid
Clearing The Mud In Lake, River, Sea
Drging Widening Channel
Froth Slurry Pump
Main Pump Model:2QV-AF(R) 3QV-AF(R) 6SV-AF(R) 8SV-AF(R) ,2CAHF, 3DAHF, 6EAHF
Discharge Size: 50mm-150mm
Capacity: 7.2m3/h-330m3/h
Head: 5m-30m
Naipu® NP-AFfroth pumps are of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. They have a vertical shaft configuration, and comprise a hopper, with vertical Bearing Assembly, and Type'NP-NAH' pump wet-end. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casing liners and Impellers.
Typical Applications---
Minerals Flotation Processing
Handle Frothy Slurries
Company Profile
Shijiazhuang Naipu Pump Co., Ltd is a leading manufacturer with 30 years of experience in designing and producing high-quality slurry pumps, Submersible slurry pump , Froth Pumps , sand gravel pumps, Dredge Pumps , and wear-resistant parts.
Naipu is capable of producing custom mining wear parts and Pump parts based on provided drawings or samples.
The company is known for its high-quality products and customized solutions, catering to a wide range of industries such as mining, mineral processing, dredging, power plants, and chemical industries.
NaiPu Main products
1. NAH , HH L Horizontal Slurry Pump
2. SP Vertical sump pump
3. ZJQ Submersible slurry pump
4. G Horizontal sand gravel pump
5. ZJQ Submersible sand pump
6. WS Dredging pump
7. AF Vertical Froth Pump
8 .AHF Horizontal Froth Pump
9. TL(R) Desulphurization Pump
10.Clean Water Pump
11. OEM Casting machinery wear parts
The Main pump model of NAH HH M L SP AF G Series
| NAH series |
L(R) ,M |
HH |
SP(R) |
G |
AF Series |
| 1.5/1B-AH(R) |
20A-L |
1.5/1 C-HH |
40PV-SP(R) |
6/4D-G |
2QV-AF |
| 2/1.5B-AH(R) |
50B-L(R) |
3/2D-HH |
65QV-SP(R) |
8/6E-G |
3QV-AF |
| 3/2C-AH(R) |
75C-L |
4/3E-HH |
100RV-SP(R) |
10/8F-G |
6SV-AF |
| 4/3C-AH(R) |
100 D-L |
4/3X-HH |
150SV-SP(R) |
10/8S-G |
8SV-AF |
| 6/4D-AH(R) |
150E-L |
6/4F-HH |
200SV-SP |
12/10G-G |
|
| 6/4E-AH(R) |
300S-L |
6/4X-HH |
250TV-SP |
14/12G-G |
|
| 8/6E-AH(R) |
10/8 R-M |
6S-H |
|
14/12T-G |
|
| 8/6R-AH(R) |
10/8 E-M |
8/6S-H |
|
16/14 G-G |
|
| 10/8F-AH(R) |
|
8/6X-H |
|
16/14TU-GH |
|
| 10/8X-AH(R) |
|
6S-HP |
|
16/14H-GH |
|
| 12/10ST-AH(R) |
|
8/6S-HP |
|
18/16G-G |
|
| 14/12ST-AH(R) |
|
8/6X-HP |
|
18/16 TU-GH |
|
| 16/14TU-AH(R) |
|
|
|
|
|
| 20/18G(TU)-AH(R) |
|
|
|
|
|
Slurry Pump Spare Parts
Main Spare Parts
Impeller, Volute Liner, Casing, ThroatBush, Frame Plate Liner Insert, Cover Plate, Frame Plate, Pump Liner Expeller, Expeller Ring,Stuffing Box, Expeller, Pump Shaft, shaft sleeve, Shaft Spacer, Bearing Assembly, Base, Stuffing Box, Gland Assembly, Bearing Housing,Lantern Ring, pump discharge pipe, flange, and so on.
Materials and Durability
Wear-Resistant Materials: Components like impellers, liners, and throat bushes are often made from high-chrome alloys, rubber, or ceramics to withstand abrasive and corrosive conditions.
Customizable Designs: Many parts can be customized based on specific operating conditions or customer requirements
OEM Service
Naipu Pump is able to process whatever pump parts and wear parts customers require. The increasing development technology of reverse engineering has further enabled the company to contra-derive the shape of a sample offered by clients and, with the help of the latest 3D imaging technology to scan the pump parts, Naipu Pump can acquire accurate drawings (based on aluminum,iron and wood model patterns) to ensure that the company's replacement parts fit 100% onto customers' pumps.
Naipu Pump understands the process and demands of the mining industry and can offer comprehensive
services tailored to customers' needs.
The material can be high chrome alloy Cr27%,Cr28% Cr30% Cr35% , A51, A61, A49,A07,C55, CD4MCU, Nature Rubber ,Stainless steel ss304 ss316 ss904, Alloy20 , Hastelloy and etc.
Application:
Mining and Mineral Processing: Handling abrasive slurries in coal, gold, copper, and iron ore mining.
Dredging and Sand Extraction: Used in river, lake, and sea dredging operations.
Power Plants: Desulphurization and ash handling systems.
Chemical Industry: Pumping corrosive and abrasive fluids.
Wastewater Treatment: Handling sludge and wastewater.
WorkShop
Shijiazhuang Naipu Pump Co., Ltd is a vertically integrated manufacturer with its own foundry workshop, machining workshop, and assembly workshop. This in-house capability allows Naipu to maintain strict quality control, reduce production lead times, and offer cost-effective solutions to clients.
Advanced Test Equipment
To ensure the products quality , each Slurry Pump and Wear parts will be inspected strictly before delivery.
Why Choose Naipu?
-
Vertical Integration: Full control over production ensures high quality and cost efficiency.
-
30 Years of Experience: Proven expertise in slurry pump manufacturing.
-
Global Reach: Trusted by clients in mining, dredging, power plants, and chemical industries worldwide.
-
Technical Support: Professional after-sales service and technical assistance.
Shijiazhuang Naipu Pump Co., Ltd is committed to delivering high-quality, cost-effective pumping solutions tailored to your needs!
Welcome to Contact Me
ShiJiaZhuang NaiPu Pump Co., Ltd
Contact person: Kitty Liu
86-13032609126
Shijiazhuang, Headquarters
Add.: No. 368, Xinshi North Road, Shijiazhuang, Hebei Province, China
Audited Supplier 
){kind=link}