| Customization: | Available |
|---|---|
| Warranty: | 1 Year (Except Wearing Parts) |
| Max.Head: | 80-110m |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
3/2 D-Hh Abrasive and Corrosive Slurries Pump
Naipu® NP-HH Slurry Pump
The HH (High Head) pump is manufactured in a standard range comprising the 3/2D, 4/3E, 6/4F and 8/6G pumps.
3/2 HH Slurry Pump Part Code No.: DH2032D21, DH2013D21, DH2147A05, DH2110A05, DH2083A05, DH2041A05, DH078G01, DH2302, DH2304, DH2125, D004MG01, DAM005M...
Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operation temperatures.
| Type |
Allowable (Kw) |
Clear Water Performance | Impeller | ||||||
| Capacity m³/hr |
Head m |
Speed rpm |
Max Efficiency |
NPSH m |
Nos of Vane |
Diameter mm |
|||
| 1.5/1 C-HH | 30 | 16.2-34.2 | 25-9 | 1400-2200 | 20 | 2-5.5 | 5 | 330 | |
| 3/2 D-HH | 60 |
68.4-136.8 |
25-87 | 850-1400 | 47 | 3-7.5 | 5 | 457 | |
| 4/3 E-HH | 120 | 126-252 | 12-97 | 600-1400 | 50 | 2-5 | 5 | 508 | |
| 6/4 F-HH | 560 | 324-720 | 30-118 | 600-1000 | 64 | 3-8 | 5 | 711 | |
| 8/6 S-HH | 560 | 468-1008 | 20-94 | 500-1000 | 65 | 4-12 | 5 | 711 | |
| 032: Frame Plate 060: Intake Joint 132: Discharge Joint 083: Throatbush 110: Volute Liner |
147: Impeller 122: Stuffing Box Seal 013: Cover Plate 124: Volute Liner Seal 041: Frame Plate Liner Insert |
If you need the slurry pump brochure and slurry pump basic handbook please contact me freely. I will send you the details by mail. You can also call me by phone
){kind=link}