Naipu E4145WRT1 High Chromium Slurry Pump Impeller
Optimum Wear Reduction Technology:
• Increased wear life - the impeller and throatbush combination will increase wear life between 30% and 50%
• Power savings - lower pump power consumption
• Cost reduction - higher pump efficiency sustained over a longer pumping operation time
• Retrofit - new design parts retrofit to your current AH slurry pumps
• Lower NPSH requirements - results in enhanced hydraulic performance and extended wear life
• Material combinations - rubber or metal part combinations available
| NPWRT impeller part no. |
Standard impeller part no. |
NPWRT throatbush part no. |
Standard throatbush part no. |
| C2145WRT1A05 |
C2147A05 |
C2110WRT1A05 |
C2110A05 |
| D3145WRT1A05 |
D3147A05 |
D3110WRT1A05 |
D3110A05 |
| E4145WRT1A05 |
E4147A05 |
E4083WRT1A05 |
E4083A05 |
| F6145WRT1A05 |
FAM6147A05 |
F6083WRT1A05 |
F6083A05 |
| FAM8145WRT1A05 |
FAM8147A05 |
G8083WRT1A05 |
G8083A05 |
| G8145WRT1A05 |
G8147A05 |
G8083WRT1A05 |
G8083A05 |
| G10145WRT1A05 |
G10147A05 |
G10083WRT1A05 |
G10083A05 |
| G12145WRT1A05 |
G12147A05 |
G12083WRT1A05 |
G12083A05 |
| GAM14145WRT1 |
GAM14147A05 |
H14083WRT1A05 |
H14083A05 |
| H14145WRT1 |
H14147A05 |
H14083WRT1A05 |
H14083A05 |
Impeller | DG4137 | EG6137 | GG12137 | FG10137 | FG8137 Gravel Sand Pump Impeller
Naipu® factory of slurry pump , gravel sand pump , dredging pump and spare parts.
Naipu Cand produce the sand pump impeller according to the drawing or sample.
Naipu can be your china factory. Welcome to contact me for catalogue.
Optimum Wear Reduction Technology parts combination's new four vane impeller design incorporates a unique vane let on the back shroud which streamlines the flow through the impeller. Other enhancements include improved hydraulic profiles, reduced turbulence, extended wear performance and lowered power consumption.
Pump Description
Slurry pump impeller is the main component in centrifugal slurry pumps which has vanes to impart and direct the centrifugal force to the slurry.
Slurry pump impeller is also the most diverse component in slurry pumps, by changing impeller, the same slurry pump can cover more different duties.
Slurry pump impellers are normally made in high chromium alloys or natural rubber, special materials are also available.
Replacement parts are dimensionally interchangeable with the AH, L, HH, G, SP series.
High quality with lower cost, short delivery times!
Main Sand Slurry Pump Impeller Code
| Parts Code |
Suitable for pump model |
Pump Type |
| B1127 |
1.5/1B-AH |
AH Horizontal Slurry Pump |
| B15127 |
2/1.5B-AH |
| C2147 |
3/2C-AH |
| D3147 |
4/3C-AH, 4/3D-AH |
| D3058 |
4/3C-AH, 4/3D-AH |
| D3021 |
4/3C-AH, 4/3D-AH |
| E4147 |
6/4D-AH, 6/4E-AH |
| E4056 |
6/4D-AH, 6/4E-AH |
| E4058 |
6/4D-AH, 6/4E-AH |
| F6147 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
| F6056 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
| F6058 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
| F6145HE2 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
| FAM8147 |
10/8F-AH |
| G8147 |
10/8ST-AH |
| FAM10147 |
12/10F-AH |
| G10147 |
12/10ST-AH |
| FAM12147 |
14/12F-AH |
| G12147 |
14/12ST-AH |
| 32056 |
50B-L |
L Low Abrasive Horizontal Slurry Pumps |
| 43056 |
75C-L |
| 64056 |
100D-L |
| 86056 |
150E-L |
| 108056 |
200E-L |
| F8147 |
10/8E-M, 10/8F-M, 10/8R-M |
M Medium Duty Slurry Pump |
| F10147 |
12/10F-M, 12/10R-M |
| CH1127 |
1.5/1C-HH |
HH High Head Slurry Pumps |
| DH2147 |
3/2D-HH |
| EH3147 |
4/3E-HH |
| FH4147 |
6/4F-HH |
| SP4206 |
40PV-SP |
SP Vertical Slurry Pumps |
| SP65206 |
65QV-SP |
| SP10206 |
100RV-SP |
| SP15206A |
150SV-SP |
| SP20206 |
200SV-SP |
| DAF4127 |
4RV-AF |
AF Froth Slurry Pump |
| BAF2127 |
2QV-AF |
| DG4137 |
6/4D-G |
G Gravel Sand Pump |
| EG6137 |
8/6E-G |
| FG8137 |
10/8F-G |
| FG10137 |
12/10G-G |
| GG12137 |
14/12G-G |
Sand Slurry Pump Impeller
Sand Pump Impeller Material
1. A05 is a wear resistant white iron that offers excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of alloy A05 is provided by the presence of hard carbides within its micro-structure. Alloy A05 is particularly suited to applications where mild corrosion resistance, as well as erosion resistance is required.
2. A07 Marten-sic white iron with moderate erosion resistance.
3. A49 is suitable for low pH corrosion duties, where erosive wear is also a problem. The alloy is particularly suitable for Flue Gas Desulphu-rization(FGD) and other corrosive applications, where the pH is less than 4. The alloy can also be used in other mildly acidic environments. A49 has an erosion resistance similar to that of Ni-Hard 1.
NaiPu Main Pump parts
Main Slurry Pump Parts : Impeller , Volute Liner , Casing , ThroatBush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange , and so on.
Rubber Spare Parts
OEM Spare Parts
Application:
The parts are widely used in Main Applications: Heavy Mining | Mineral Processing | Sand and Gravel |Coal Prep | Cyclone Feeds | Aggregate Processing | Fine Primary Mill Grinding | Chemical Slurry Service | Tailings | Secondary Grinding | Industrial Processing | Pulp And Paper | Food Processing | Cracking Operations | Ash Handling | Pipeline Transport | High Velocity Hydraulic Transport |Food Processing | Explosive Sludge In Metal Smelting | River And Pond Dredging | Heavy Refuse Removal | Larger Particle Or Low NPSHA Applications | Continuous (Snore) Sump Pump Operation | Abrasive Slurries | High Density Slurries | Large Particle Slurries | Sump Drainage | Wash down | Floor Drainage | Mixing | Iron Ore | Cooper | Diamond | Alumina | Coal | Gold | Kaolin | Phosphorite | Steel | Palm | Suger | Chemical | Power | FGD | Frac Sand Blending | Construction | City Sewage | etc.
Main sand Slurry Pump Model
| AH series |
L(R) ,M |
HH |
SP(R) |
G |
AF Series |
| 1.5/1B-AH(R) |
20A-L |
1.5/1 C-HH |
40PV-SP(R) |
6/4D-G |
2QV-AF |
| 2/1.5B-AH(R) |
50B-L(R) |
3/2D-HH |
65QV-SP(R) |
8/6E-G |
3QV-AF |
| 3/2C-AH(R) |
75C-L |
4/3E-HH |
100RV-SP(R) |
10/8F-G |
6SV-AF |
| 4/3C-AH(R) |
100 D-L |
4/3X-HH |
150SV-SP(R) |
10/8S-G |
8SV-AF |
| 6/4D-AH(R) |
150E-L |
6/4F-HH |
200SV-SP |
12/10G-G |
|
| 6/4E-AH(R) |
300S-L |
6/4X-HH |
250TV-SP |
14/12G-G |
|
| 8/6E-AH(R) |
10/8 R-M |
6S-H |
|
14/12T-G |
|
| 8/6R-AH(R) |
10/8 E-M |
8/6S-H |
|
16/14 G-G |
|
| 10/8F-AH(R) |
|
8/6X-H |
|
16/14TU-GH |
|
| 10/8X-AH(R) |
|
6S-HP |
|
16/14H-GH |
|
| 12/10ST-AH(R) |
|
8/6S-HP |
|
18/16G-G |
|
| 14/12ST-AH(R) |
|
8/6X-HP |
|
18/16 TU-GH |
|
| 16/14TU-AH(R) |
|
|
|
|
|
| 20/18G(TU)-AH(R) |
|
|
|
|
|
Welcome to contact me
Shijiazhuang naipu pump co.,ltd
contact : Katherine Hou
We are looking for partner around the world. NaiPu can be your china factory , and produce OEM brand as your request.
Welcome to join us to be our distributor !
Audited Supplier 
){kind=link}