6/4F-HH Metal Liner High Head slurry pump HH TYPE
Direct Factory of slurry pump, sand gravel pump , dredging pump and OEM Service with 30 years producing experience
HH High Head Mining Slurry Pump
Description
Name: NP-HH High Head Slurry Pump
Pump Type: centrifugal
Drvie Type: ZVz/CRz/CV/DC
Power: motor/diesel
Discharge Size: 1to 6 inch
Capacity: 16.2-1008m³/h
Head: 25-118m
Material :High Chrome White Iron Cr27%
Main Pump Model : 1.5/1C-HH 3/2D-HH 3/2DD-HH 4/3E-HH 4/3EE-HH 6/4F-HH 6/4FF-HH 6/4x- HH 6S-H 8/6S-H 8/6X-H 6S-HP 8/6S-HP 8/6X-HP
Type Notation :
6X4F-NP-HH
6----- Suction Diameter(Inch)
4 ------ Discharge Diameter(Inch)
NP---- ShiJiaZhuang NaiPu Pump Co.,Ltd
HH ------ High Head Slurry Pump
NP-HH SLURRY PUMP PERFORMANCE PARAMETERS
| Type |
Allowable Mating Max. Power(Kw) |
Clear Water Performance |
Impeller |
| Capacity/Q m³/hr |
Head/m |
Speed/rpm |
Max Efficiency/% |
NPSH/m |
Nos of Vane |
Impeller Diameter/mm |
| 1.5X1C-NP-HH |
30 |
16.2--34.2 |
25-92 |
1400--2200 |
20 |
2--5.5 |
5 |
330 |
| 3X2D-NP-HH |
60 |
68.4--136.8 |
25-87 |
850--1400 |
47 |
3-7.5 |
5 |
457 |
| 4X3E-NP-HH |
120 |
126-252 |
12-97 |
600-1400 |
50 |
2-5 |
5 |
508 |
| 6X4F-NP-HH |
560 |
324-720 |
30-118 |
600-1000 |
64 |
3-8 |
5 |
711 |
| 8X6S-NP-HH |
560 |
468-1008 |
20-94 |
500--1000 |
65 |
4-12 |
5 |
711 |
Feature:
1. HH Horizontal Slurry Pumps are 100% fully interchangeable with the most common slurry pump design in the mining industry
2. NP- HH Slurry pump is a horizontal double-shell axial suction centrifugal slurry pump.
3. The discharge of the pump can be installed every intervals of 45° Rotating eight direction within 360°
4. The HH slurry pump can deliver strong abrasive slurry in a small flow low head region, that is, in a region where the rotational speed is lower than 50% of The maximum rotational speed of the pump and the outlet flow rate of the pump is less than 8 m/s. In the high head large flow area,The Pump can transport light abrasive slurry.
5. All Standard seal options are available of centrifugl , gland or mechanical type.
6. HH High Head slurry pump sizes range from 25mm discharge size through to 150mm
7. The impeller and liner for HH High Head Slurry Pump are adoptable of wear resistant metal only.
HH Metal Liner High Head slurry pumps are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Tailings Delivery
Cyclone Feed
Diamond Concentrate
Slag Granulation
Bottom Boiler and Fly Ash
Mill Discharge
Construction for HH High Head Slurry Pump
Main Part Number At The Drawing
032:Frame Plate
110:Volute Liner
041:Frame Plate Liner Insert
124: Volute Cover Seal
122: Stuffing Box Seal |
132:Discharge Joint
147:Impeller
013:Cover Plate
083:Throat bush
060: Intake Joint |
Materials of Construction
| |
LINERS |
IMPELLERS |
CASING |
BASE |
EXPELLER |
EXPELLER RING |
SHAFT SLEEVE |
SEALS |
| Standard |
Chrome Alloy |
Chrome Alloy |
SG Iron |
SG Iron |
Chrome Alloy
or
SG Iron |
Chrome Alloy
or
SG Iron |
SG Iron |
Rubber |
Company Profile
Company Profile
Naipu Pump is a professional global manufacturer of industrial pumps with more than 30 years production experience. Mainly produces various types of slurry pumps, sewage pumps, sump pumps, high chromium alloy accessories and various OEM and ODM production.Already passed the quality certification ISO9001, environmental certification ISO14001, and health Certification ISO45001. The company covers an area of more than 60,000 square meters, has 150 skilled workers, 50 professional and technical service personnel, and its products are sold all over the world. The annual output is 8,000 tons of accessories, 8,000 pumps, and annual sales of 20 million US dollars.
After years of sustainable development, Naipu has gradually upgraded to an environmentally friendly factory, with environmentally friendly resin sand machine modeling, high-efficiency casting electric furnace, heat treatment, and rough sand cleaning system. Every molding has undergone strict inspection to ensure the full brushing of the protective coating, which is the prerequisite to ensure the production of qualified castings.After passing the environmental and health certification, the workers' working environment has been improved.
Our spare parts inventory is very sufficient to ensure that each customer can replace the spare parts in the first time, and will receive sufficient size inspection and packaging before shipment.
Our Products are suitable for all slurry pumping applications - chemical, mineral processing, power generation and general industry.
NaiPu Main products
1. NAH , HH L Horizontal Slurry Pump
2. SP Vertical sump pump
3. ZJQ Submersible slurry pump
4. G Horizontal sand gravel pump
5. ZJQ Submersible sand pump
6. WS Dredging pump
7. AF Vertical Froth Pump
8 .AHF Horizontal Froth Pump
9. TL(R) Desulphurization Pump
10.Clean Water Pump
11. OEM Casting machinery wear parts
| NHA series |
L(R) ,M |
HH |
SP(R) |
G |
AF Series |
| 1.5/1B-NAH(R) |
20A-L |
1.5/1 C-HH |
40PV-SP(R) |
6/4D-G |
2QV-AF |
| 2/1.5B-NAH(R) |
50B-L(R) |
3/2D-HH |
65QV-SP(R) |
8/6E-G |
3QV-AF |
| 3/2C-NAH(R) |
75C-L |
4/3E-HH |
100RV-SP(R) |
10/8F-G |
6SV-AF |
| 4/3C-NAH(R) |
100 D-L |
4/3X-HH |
150SV-SP(R) |
10/8S-G |
8SV-AF |
| 6/4D-NAH(R) |
150E-L |
6/4F-HH |
200SV-SP |
12/10G-G |
2AHF |
| 6/4E-NAH(R) |
300S-L |
6/4X-HH |
250TV-SP |
14/12G-G |
3AHF |
| 8/6E-NAH(R) |
10/8 R-M |
6S-H |
|
14/12T-G |
4AHF |
| 8/6R-NAH(R) |
10/8 E-M |
8/6S-H |
|
16/14 G-G |
6AHF |
| 10/8F-NAH(R) |
12/10F-M |
8/6X-H |
|
16/14TU-GH |
|
| 10/8X-NAH(R) |
|
6S-HP |
|
16/14H-GH |
|
| 12/10ST-NAH(R) |
|
8/6S-HP |
|
18/16G-G |
|
| 14/12ST-NAH(R) |
|
8/6X-HP |
|
18/16 TU-GH |
|
| 16/14TU-NAH(R) |
|
|
|
|
|
| 20/18G(TU)-NAH(R) |
|
|
|
|
|
Slurry Pump Spare Parts
Main Spare Parts
Impeller, Volute Liner, Casing, ThroatBush, Frame Plate Liner Insert, Cover Plate, Frame Plate, Pump Liner Expeller, Expeller Ring,Stuffing Box, Expeller, Pump Shaft, shaft sleeve, Shaft Spacer, Bearing Assembly, Base, Stuffing Box, Gland Assembly, Bearing Housing,Lantern Ring, pump discharge pipe, flange, and so on.
Materials and Durability
Wear-Resistant Materials: Components like impellers, liners, and throat bushes are often made from high-chrome alloys, rubber, or ceramics to withstand abrasive and corrosive conditions.
Customizable Designs: Many parts can be customized based on specific operating conditions or customer requirements
OEM Service
Naipu Pump is able to process whatever pump parts and wear parts customers require. The increasing development technology of reverse engineering has further enabled the company to contra-derive the shape of a sample offered by clients and, with the help of the latest 3D imaging technology to scan the pump parts, Naipu Pump can acquire accurate drawings (based on aluminum,iron and wood model patterns) to ensure that the company's replacement parts fit 100% onto customers' pumps.
Naipu Pump understands the process and demands of the mining industry and can offer comprehensive
services tailored to customers' needs.
The material can be high chrome alloy Cr27%,Cr28% Cr30% Cr35% , A51, A61, A49,A07,C55, CD4MCU, Nature Rubber ,Stainless steel ss304 ss316 ss904, Alloy20 , Hastelloy and etc.
Application:
Mining and Mineral Processing: Handling abrasive slurries in coal, gold, copper, and iron ore mining.
Dredging and Sand Extraction: Used in river, lake, and sea dredging operations.
Power Plants: Desulphurization and ash handling systems.
Chemical Industry: Pumping corrosive and abrasive fluids.
Wastewater Treatment: Handling sludge and wastewater.
WorkShop
Shijiazhuang Naipu Pump Co., Ltd is a vertically integrated manufacturer with its own foundry workshop, machining workshop, and assembly workshop. This in-house capability allows Naipu to maintain strict quality control, reduce production lead times, and offer cost-effective solutions to clients.
Advanced Test Equipment
To ensure the products quality , each Slurry Pump and Wear parts will be inspected strictly before delivery.
Why Choose Naipu?
-
Vertical Integration: Full control over production ensures high quality and cost efficiency.
-
30 Years of Experience: Proven expertise in slurry pump manufacturing.
-
Global Reach: Trusted by clients in mining, dredging, power plants, and chemical industries worldwide.
-
Technical Support: Professional after-sales service and technical assistance.
Shijiazhuang Naipu Pump Co., Ltd is committed to delivering high-quality, cost-effective pumping solutions tailored to your needs!
Welcome to Contact Me
ShiJiaZhuang NaiPu Pump Co., Ltd
Contact person: Kitty Liu
86-13032609126
Shijiazhuang, Headquarters
Add.: No. 368, Xinshi North Road, Shijiazhuang, Hebei Province, China
Audited Supplier 
){kind=link}