14 Inch River Sand Extraction Sand Gravel Pump Dredging Pump

• After-sales Service: Yes
• Warranty: 1 Year
• Max.Head: 50-80m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Model NO.: 16/14 TU-G
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Product Name: Sand Gravel Pumps
• Size: 8/6e-G
• Material: High Chrome
• Color: Blue, Yellow, Red or as Customers′ Request
• Application: Mining, Explosive-Sludge, Dredging in Dredger
• Transport Package: Wooden Case
• Specification: 8/6E-G
• Trademark: Naipu or OEM
• Origin: China
• HS Code: 8413701090
• Production Capacity: 500sets/Month

Product Description

                        14 inch river sand extraction Sand Gravel Pump dredging pump



Naipu NP-G series of dredge and gravel pumps is designed specifically for continous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life.

Typical Application -
Slag Granulation
Suction Hopper Dredging
Dredging
Barge Loading
Sand reclamation
Sugar beet

1. Application:
Absorb the silt and sand in the river, lake, sea, reservoir, pound, electric power plant, stone processing plant, deep well.

2. Technological Characteristic:
A horizontal, single-shell structure pump, flow components hardware nickel, chromium high abrasion resistant material and has good wear resistance, corrosion resistance and high reliability.

Pump and drive straight for the choice of the drive, V-belt drive, hydraulic coupling drive, drive reducer.

The discharge direction of pump can be oriented in any direction of 360° .

Pump in the direction of the export of a 360-degree rotation installation location to accommodate different installation conditions at the scene.

Sealing Forms :
1 Packing gland For the suction or gravity condition. The pressure of sealing liquid should be 35Kpa higher than the discharge pressure of the seen in following table.

2 Expeller seal In general for gravity condition the gravity head should not be exceeded to 10% of the total head of the pump and the shaft power increase by 5% about.

3. Features:
High efficiency, wear resistant, stable performance.

4. Type notation:
6/4D-G (orGH)
6-------------suction diameter(inch)
4-------------discharge diameter(inch)
D-------------frame form
G-------------gravel pump
GH-----------high-head of gravel pump

Construction Drawing:

Main Part Number At the Drawing
003: Base		131:Bowl
005:Bearing Assembly		137:Impeller
132: Intake Joint		041:Back Liner
Discharge Joint		135:Door Clamp Ring
130:Discharge Flange		134:Adapter Plate Clamp Ring
Intake Flange		124:Volute Cover Seal
013: Cover Plate

 

Material of Construction
	VOLUTE	IMPELLERS	BASE	EXPELLER	EXPELLERRING	SHAFT SLEEVE	SEALS
Standards	High Chrome Alloy	High Chrome Alloy	Cast Iron	Chrome Alloy or SG Iron	Chrome Alloy or SG Iron	SG Iron	Natural Rubber
Options	SG Iron	SG Iron	Mild Steel Fabricated	SG Iron	SG Iron	EN56C Ferralium Hastelloy C Ceramic Stellite Chrome Oxide	Nordel Neoprene Viton    Butyl EPDM

Pump Performance Curve Selection Chart

NP-G Pump Performance Parameters
 

Pump Model	Allowable Max. Power (kW)	Clear Water Performance							Max Solid Passing (mm)
		Capacity Q		Head	Speed	Max.Eff.	NPSH	Impeller
		m3/h	l/s	H(m)	n(r/min)	η%	(m)	Dia.
6/4D-G	60	36-250	10-70	5-52	600-1400	58	2.5-3.5	378	82
8/6E-G	120	126-576	35-160	6-45	800-1400	60	3-4.5	378	127
10/8S-GH	560	216-936	60-260	18-80	500-1000	65	3-7.5	533	180
10/8S-G	560	180-1440	50-400	13-50	500-950	72	2.5-5	711	178
12/10G-G	600	360-1440	100-400	10-60	400-850	65	1.5-4.5	667	220
12/10G-GH	1200	288-2808	80-780	16-80	350-700	73	2.0-10.0	950	210
14/12G-G	1200	576-3024	160-840	8-70	300-700	68	2.0-8.0	864	241
16/14TU-GH	1200	324-3600	90-1000	26-70	300-500	72	3.0-6.0	1270	230
18/16T-G	1200	720-4320	200-1200	12-48	250-500	72	3.0-6.0	1067	254

Product Overview





Naipu Other related Sand Gravel Pumps





Sand Gravel Pump Application

Applications
Heavy mining	Mineral Processing	Coal Preparation	Cyclone Feeds	Aggregate Mining	Fine Primary Mill Grinding
Chemical Slurry Service	Tailings	Secondary Grinding	Industrial Processing	Pulp and Paper	Food Processing
Cracking Operation	Ash Handling	Pipeline Transport	High velocity Hydraulic Transport	Food Processing	Explosive in metal smelting
River and Pond Dredging	Heavy Refuse Removal	Washdown	High density slurries	Abrasive slurries	Continuous Sump Pump Operation
Floor drainage	iron ore	Copper mine	Diamond mine	Alumina mine	Coal mine
Gold mine	kaolin	phosphorite	steel	Palm	Sugar
Chemical	Power	FGD	Frac Sand Blending	Construction	City Sewage

Possible Faults and Settlements 
 

Faults	Reason	Settlement
1.Pump fails to discharge any water,The hand of pressure gauge beat violently	1.Suction pipe don't have enough water. 2.Suction pipe blocked or the valve is locked.	1. Inject enough water 2.unlock the inlet valve,clear the blocks 3.Exclude the air leakage
2.The pump can't discharge water,the hand of vacuum meter beat heavily.	1.The inlet valve is unlocked or silted up. 2.The resistance of suction pipe is too big or silted up. 3.The height of suction is too high.	1.Unlock the valve or desilting  2.improve the design of  suction pipe or desilt  3.Lower the height of the installation.
3.The pump can't discharge water,pressure gauge shows heavy pressure.	1.The resistance of the discharge pipe is too big. 2.The impeller blocked 3.The speed is slow.	1.Check and adjust the outlet pipe. 2.Clear the impeller 3. Improve the speed.
4.The pump doesn't rotate	The volute is silted up by the blocks.	Clear the blocks
5.The capacity is not enough	1.The blocks of the impeller or the inlet or outlet pipe. 2.The abrasion of the impeller is heavily. 3.The speed is low to normal  4.Pump is installed unreasonably or the leakage of the inlet pipe. 5.The transporting height is too high,the loss of the resistance of the inside pipe are too big. 6.The inlet valve not open enough or blocked 7.The packing seal leaks	1.Clear the impeller or pipe. 2.Change the impeller 3.Adjust the speed 4.Install again or stop leaking.   Decrease the height of the transport or reduce the resistance. Unlock the inlet valve   Compress the packing tightly
6.The motor of the pump is overloaded	1.The head of the pump exceeds the head of the working condition. 2.Not consider the slurry density when selecting the pump. 3.The packing press tightly	1.Turn down the outlet valve,cut the impeller or lower the speed. 2.Select the motor again. 3.Adjust the the screw of the  packing gland
7.Abnormal sound in the pump, and no water out	1.The resistance of the inlet pipe is too big. 2.The height of the suction is too high. 3.Cavitation occurred  there is air in the inlet The temperature of the liquid is too high	Clear the suction pipe and sluice valve. Lower the height of the suction  Adjust the water valve and let the pump operate in the defined limits. Block the leakage. Lowering the liquid temperature.
8.pump vibrates	1.pump cavitate  2.The block of the impeller single vane  3.The no concentricity  between the pump shaft and motor shaft 4.Fasteners or foundation loose	1.Adjust the water valve ,lower the height of the installation,reduce the resistance of the inlet. 2.Clear the impeller 3.Alignment again 4.Fasten the screw,and reinforce the foundation.
9.Bearing is overheat	1.lock the cooling water 2.lubrication is not good. 3.the lubrication oil is not clear 4.the wrong direction of the thrust bearing. 5.there is something wrong with the bearing.	Open the cooling water Adjust the oil quantity  Clear the shaft,change oil According to the inlet pressure,adjust the direction of the thrust bearing. Change the bearing
10.Packing short life	The material of packing is not good	Change the packing
11.pump leak oil	1.High oil level 2.The rubber parts invalid   3.Assembly problem	1.Lower the oil level 2.Change rubber spares 3.Adjust the assembly
12 Pump head leaking	1.The rubber parts not press well	Assembly again or press tightly

Contact Us

Shijiazhuang Naipu Pump Co.,Ltd

Contact Person: Karen Tan

Welcome to visit our factory !