50ZJH High Chrome Alloy Cast Iron Mining Solid Pump
1. Slurry Pump Features:
High Head Slurry Pump Spare parts feature
The impeller is the main rotating component which normally has vanes to impart the centrifugal force to the liquid. Most slurry pump casing are "slower" than their water pump cousins, primarily to reduce wear though lower internal velocities.
Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures.
Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
2. Slurry Pump Spare Parts:
We supply our customers with complete sets of equipment as well as a variety of wear-resistant wet parts, and site service is available with service quality guaranteed.
| Type |
Allowable Mating Max. Power(Kw) |
Clear Water Performance |
Impeller |
| Capacity/Q m³/hr |
Head/m |
Speed/rpm |
Max Efficiency/% |
NPSH/m |
Nos of Vane |
Impeller Diameter/mm |
| 25ZJH |
30 |
16.2--34.2 |
25-92 |
1400--2200 |
20 |
2--5.5 |
5 |
330 |
| 50ZJH |
60 |
68.4--136.8 |
25-87 |
850--1400 |
47 |
3-7.5 |
5 |
457 |
| 75ZJH |
120 |
126-252 |
12-97 |
600-1400 |
50 |
2-5 |
5 |
508 |
| 100ZJH |
560 |
324-720 |
30-118 |
600-1000 |
64 |
3-8 |
5 |
711 |
| 150ZJH |
560 |
468-1008 |
20-94 |
500--1000 |
65 |
4-12 |
5 |
711 |
Audited Supplier 
){kind=link}