DG4137 Sand Slurry Pump Part A05 Impeller
1. Slurry pump impeller
Slurry pump impeller - high anti-abrosive can be supply with huge amount within a short period.
Naipu Impeller is one of the most important parts of slurry pump. When impeller is rotating, the slurry pump could meet the requirements of the equipment. However, it is a component, which is worn out very easily. Therefore, for long service life of the impeller, the material plays an important role here.
Naipu pump offers the two solutions for this problem. We choose the white iron, high chrome (27%) for the strong abrasive slurries, also with the sharp particles. For the corrosive slurries with blunt particles, we recommend the natural rubber.
Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures.
Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
2. Metal impeller material
Sand slurry pump Impeller part code: DG4137, EG6137, FG8137, FG10137, GG12137, GGH10137, HG14137...
1) Material: A05,W1, W2, NA, Cr15Mo3, Cr24, Cr26, Cr27...
2) Vanes from 3-6. It depending on the size of the particles in the slurry.
3) Impeller type including Close, Semi-open and Open type. Impellers are generally closed because of higher efficiencies and are less prone to wear in the front liner region. Open impellers are more common in smaller pumps or where particle blockage may be a problem or where the shear provided by an open impeller is an aid to pumping froth.
4) We can also produce the non-standard impellers for some special situations.
Pumping coarse coal
Pumping fibrous material
Reduced diameter impellers
Reduced eye impellers.
3. Main Sand Slurry Pump Impeller Code
| Parts Code |
Suitable for pump model |
Pump Type |
| B1127 |
1.5/1B-AH |
AH Horizontal Slurry Pump |
| B15127 |
2/1.5B-AH |
| C2147 |
3/2C-AH |
| D3147 |
4/3C-AH, 4/3D-AH |
| D3058 |
4/3C-AH, 4/3D-AH |
| D3021 |
4/3C-AH, 4/3D-AH |
| E4147 |
6/4D-AH, 6/4E-AH |
| E4056 |
6/4D-AH, 6/4E-AH |
| E4058 |
6/4D-AH, 6/4E-AH |
| F6147 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
| F6056 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
| F6058 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
| F6145HE2 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
| FAM8147 |
10/8F-AH |
| G8147 |
10/8ST-AH |
| FAM10147 |
12/10F-AH |
| G10147 |
12/10ST-AH |
| FAM12147 |
14/12F-AH |
| G12147 |
14/12ST-AH |
| 32056 |
50B-L |
L Low Abrasive Horizontal Slurry Pumps |
| 43056 |
75C-L |
| 64056 |
100D-L |
| 86056 |
150E-L |
| 108056 |
200E-L |
| F8147 |
10/8E-M, 10/8F-M, 10/8R-M |
M Medium Duty Slurry Pump |
| F10147 |
12/10F-M, 12/10R-M |
| CH1127 |
1.5/1C-HH |
HH High Head Slurry Pumps |
| DH2147 |
3/2D-HH |
| EH3147 |
4/3E-HH |
| FH4147 |
6/4F-HH |
| SP4206 |
40PV-SP |
SP Vertical Slurry Pumps |
| SP65206 |
65QV-SP |
| SP10206 |
100RV-SP |
| SP15206A |
150SV-SP |
| SP20206 |
200SV-SP |
| DAF4127 |
4RV-AF |
AF Froth Slurry Pump |
| BAF2127 |
2QV-AF |
| DG4137 |
6/4D-G |
G Gravel Sand Pump |
| EG6137 |
8/6E-G |
| FG8137 |
10/8F-G |
| FG10137 |
12/10G-G |
| GG12137 |
14/12G-G |
Contact Person
Katherine Hou
Audited Supplier 
){kind=link}