| Customization: | Available |
|---|---|
| Max.Head: | 50-80m |
| Max.Capacity: | >400 L/min |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Naipu dredge and gravel slurry pumps are designed for the continuous handling of the most difficult higher abrasive slurries, containing solids too large to be pumped by a standard slurypump.
They are suitable for delivering slurries in Mining, explosive sludge in metal melting, dredging in
Dredger and course of rivers and other fields.
Construction of this pump is of single casing connected by means of clamp bands and wide
Wet passe.
The wet-parts are made of Ni-hard and high chromium abrasion-resistance alloys.
The discharge direction of pump can be oriented in any direction of 360°.
This type of pump possesses the advantages of easy installation and operation, good performance
Of NPSH and Abrasion-resistance
NP-G SLURRY PUMP PERFORMANCE PARAMETERS for Sand Gravel Pumping machine
|
Model |
Flow(m3/h) |
Head(m) |
Speed(r/min) |
Efficiency(%) |
NPSHr/m |
Max permissible particle size/mm |
|
6X4D-NP-G |
187-36 |
7-51 |
1400-600 |
30-58 |
1.5-3.7 |
82 |
|
8X6E-NP-G |
576-133 |
10-48 |
1400-800 |
60-54 |
1.2-4.2 |
127 |
|
10X8F-NP-G |
930-216 |
11-44 |
940-500 |
65-34 |
3-7 |
178 |
|
12X10G-NP-G |
1512-360 |
11-58 |
850-400 |
70-50 |
1.5-6 |
220 |
|
14X12G-NP-G |
3168-522 |
9.5-66 |
700-300 |
68-60 |
2-8.5 |
241 |
|
16X14TU-NP-G |
3024-900 |
14-45 |
500-300 |
70-50 |
3.5-6.5 |
254 |
|
10X8F-NP-GH |
1091-324 |
19.2-56.5 |
800-500 |
72-60 |
1.5-5 |
180 |
|
12X10G-NP-GH |
2232-612 |
28-77 |
700-450 |
73-60 |
1.5-8 |
210 |
Sand Gravel Pumping Machine Custruction Drawing:
Company Information
ShiJiazhuang Naipu Pump Co.,Ltd is Specialized in the manufacturer and sales of slurry pump and pump parts, especially the design and manufacture of products made with high abrasive, anti corrosive rubber material, including ZJ(R), ZJM, ZJH, ZJL, ZJS Series Slurry pump, ZJG, ZG Series slurry pump, WS(G)SERIES Dredging Pump, TL(R) Desulphurization pump and PNJ Series Slurry pump.
The Products are widely used in mining , power, metallurgy, coal , dredging, building material and other industrial lines to pump concentrate, tailing , sludge, and other abrasive high density slurries.
NaiPu Main Slurry Pump Model
| AH series | L(R) ,M | HH | SP(R) | G | AF Series |
| 1.5/1B-AH(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G | 2QV-AF |
| 2/1.5B-AH(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G | 3QV-AF |
| 3/2C-AH(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G | 6SV-AF |
| 4/3C-AH(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G | 8SV-AF |
| 6/4D-AH(R) | 150E-L | 6/4F-HH | 200SV-SP | 12/10G-G | |
| 6/4E-AH(R) | 300S-L | 6/4X-HH | 250TV-SP | 14/12G-G | |
| 8/6E-AH(R) | 10/8 R-M | 6S-H | 14/12T-G | ||
| 8/6R-AH(R) | 10/8 E-M | 8/6S-H | 16/14 G-G | ||
| 10/8F-AH(R) | 8/6X-H | 16/14TU-GH | |||
| 10/8X-AH(R) | 6S-HP | 16/14H-GH | |||
| 12/10ST-AH(R) | 8/6S-HP | 18/16G-G | |||
| 14/12ST-AH(R) | 8/6X-HP | 18/16 TU-GH | |||
| 16/14TU-AH(R) | |||||
| 20/18G(TU)-AH(R) |
| Slurry Pump Basic Part No. | Material Code | Part Name |
| 147 | A05,A07,A49, R26,R08,R55,R33…. | Impeller |
| 001 | E62 | Adjusting Screw |
| 003 | G01 | Base |
| 004 | G01 | Bearing Housing |
| 005 | Bearing Assembly | |
| 009 | Bearing | |
| 011 | E62 | Clamp Washer |
| 013 | D20 | Cover Plate |
| 015 | E62 | Cover Plate Bolt |
| 017 | R26A R08, R55, R33 ,S21, S42,S31… | Cover Plate Liner |
| 018 | R26A R08, R55, R33 ,S21, S42,S31… | Cover Plate Liner |
| 024 | E62 | End Cover |
| 028 | G01,A05, C23 | Expeller |
| 029 | G01,A05, C23 | Expeller Ring |
| 029R | R08, R26,R55,R33 | Expeller Ring (Rubber) |
| 032 | D20 | Frame Plate |
| 034 | E62 | Frame Plate Bolt |
| 036 | R26A R08, R55, R33 ,S21, S42,S31… | Frame Plate Liner |
| 039 | E63 | Frame Plate Stud |
| 041 | A05,A07,A49, R26,R08,R55,R33….. | Frame Plate Liner Insert |
| 044 | G01, K24,C23 | Gland Assembly |
| 060 | Rubber | Intake Joint |
| 062 | G01 | Labyrinth |
| 063 | 1Cr18Ni9Ti | Lantern Ring |
| 064 | Rubber | Impeller O Ring |
| 067 | E62 | Neck Ring |
| 070 | E05 | Shaft Key |
| 073 | E05 | Shaft |
| 075 | D20 | Shaft Sleeve |
| 076 | D20 | Shaft Sleeve(Long) |
| 078 | G01, A05 | Stuffing Box |
| 081 | E02 | Keeper Plate |
| 083 | A05,R26A | Throat Bush |
| 085 | E02 | Cotter |
| 090 | S10 | Lip Seal |
| 109 | Rubber | Shaft O Ring |
| 110 | A05,A07,A49 | Volute Liner |
| 111 | Q05 | Packing |
| 117 | E62 | Shaft Spacer |
| 118 | 1Cr18Ni9Ti | Lantern Restrictor |
| 122 | Rubber | Expeller Ring/ Stuffing Box Seal |
| 124 | Rubber | Volute liner Seal |
| 125 | Rubber | Volute Frame Seal |
| 132 | Rubber | Discharge Joint Ring |
| 138 | E62 | Grease Cup Adaptor |
| 217 | Rubber | Impeller O Ring |
| 239 | C23 | Impeller Release Collar |
Model Workshop --casting Work Shop-- Machining workshop--assembly workshop--stockage
The slurry pump are widely used in mining, power , metallurgy , coal, dredging, building material and other industrial lines to pump concentrate , tailings, sludge and other abrasive , high density slurries.
Our Services
1.Quick Reply.All Message or email will get reply within 8 hours
2.We can help to select the suitable pump if you can not sure which model pump suitable for you
3.We have a group of high quality technicians with rich experience who can solve everything during the whole process.
4. Gurantee Period : 1 years
5. Each parts will be inspected strictly to ensure all the parts qualified. And also each parts will be labled taken picture before shipment
5.Perfect after -sales .We will be responsible for the whole life period
5.OEM order.Many material are available ,like High chrome, rubber , stainless steel and etc.,
ShiJiaZhuang NaiPu Pump Co.,Ltd
Contact person :Kitty Liu
Mobile+86-13032609126
If you are intrested in sand suction pump, please do not hesitate to contact us!
){kind=link}