300FF-L Ruber Lined Lower Abrasive Slurry Pumps

• Customization: Available
• Max.Head: 80-110m
• Max.Capacity: >400 L/min
• Model NO.: 300FF-LR
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Slurry Pumps
• Name1: Low Abrasive Slurry Pump
• Name2: Chemical Pump
• Seal Type: Packing Seal/Expeller Seal/Mechanical Seal
• Drive Type: Zvz/Crz/CV/DC
• Discharge Size: 50mm-450mm
• Application1: Electric Factory Coal Preparation
• Application2: Coal Washing
• Application3: Chemical Medium Processing
• Application4: Effluent Handling
• Application5: Salt and Sugar Industry
• Application6: Sand and Gravel Handling
• Application7: Thickner and Tailings
• Application8: Power Generation
• Application9: Mineral Processing, Coal, Copper, Gold
• Transport Package: Wooden Case
• Specification: 300FF-LR
• Trademark: Naipu
• Origin: China
• HS Code: 8413701090
• Production Capacity: 500 Sets/Month

Product Description

                                 300FF-L Ruber Lined Lower abrasive Slurry pumps
Type ZJD pumps pumps are cantilevered,horizontal,centrifugal slurry pumps.They are suitable for delivering lower abrasive,lower abrasive,lower density slurries for metallurgical,mining,coal and building material departments.The shaft seal adopt gland seal and centrifugal seal.
Type ZJD pumps adopt high speed operation and so they have small volumes saving floor area.The frame plate has interchangeable,wear-resistant metal or rubber,(Rubber for frame plates impellers of pumps with discharge dia.above 550mm).The discharge position by request may be rotated 8 different angles at internal of 45 degrees for installation and application.
The pump type should be selected by its performance curves for reference and the selection of capacity range is between 40% -100%.(The corresponding capacity against the max.efficiency point at one speed is 100%)





Features

Bearing Assembly---a large diameter with short overhang minimizes deflection and contributes to long bearing life.
Only four through bolts are required to hold the cartridge type housing in the frame.

Liners-easily replaceable liners are bolted,not glued,to the casing for positive attachment and easily maintenance.Hard metal liners are completely interchangeable with pressure molded elastomer.Elastomer Seal Rings back all liner joints.

Casing-Casing halves of cast or ductile iron with external reforcing ribs provide high operating pressure capabilities and an extra measure of safety.

Impeller-front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable cast in impeller threads require no inserts or nuts.High efficiency and high head designs are also available.

Throat Bush- wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

One piece frame--a very robust one-piece frame cradies the cartridge type bearing and shaft assembly.An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.

Naipu NP-L Metal Liner Pump Work Parameters
 

Type	Allowable Mating Max.Power(kw)	Clear Water Performance				Impeller
		Capacity(m3/h)	Head(m)	Speed(rpm)	Max Efficiency%	NPSH/m	Nos of Vane	Impeller Diameter/mm
20A-NP-L	7.5	2.34-10.8	6--37	1400--3000	30		4	152.4
50B-NP-L	15	16.2--76	9--44	1400--2800	55	3.5--8	5	190
75C-NP-L	30	18--151	4--45	900--2400	57	3--6	4	229
100D-NP-L	60	50--252	7--46	800--1800	60	2--3.5	4	305
150E-NP-L	120	115--486	12--51.5	800--1500	65	2--6	4	381
200E-NP-L	120	234--910	9.5--40	600--1100	64	3--6	4	457
250F-NP-L	120	396--1425	8--30	500--800	77	2--10	5	550
300S-NP-L	560	468--2538	8--60	400--950	79	2--10	5	653
350S-NP-L	560	650--2800	10--59	400--840	81	3--10	5	736
400ST-NP-L	560	720--3312	7--51	300--700	80	2--10	5	825
450ST-NP-L	560	1008--4356	9--48	300--600	80	2--9	5	933
550TU-NP-L	1200	1980--7920	10--50	250--475	86	4--10	5	1213

Naipu NP-L Metal Liner Pump Construction Drawing


Naipu Main Pump Type
 

Naipu Main Slurry Pump Models
NP-AH	NP-HH	NP-SP	NP-G	NP-AF	NP-L	NP-M
1.5/1B-AH(R)	1.5/1C-HH	40PV-SP(R)	6/4D-G	3QV-AF	20A-L	10/8R-M
2/1.5B-AH(R)	3/2D-HH	65QV-SP(R)	8/6E-G	4RV-AF	50B-L(R)	10/8E-M
3/2C-AH(R)	4/3E-HH	100RV-SP(R)	10/8F-G	6SV-AF	75C-L
4/3C-AH(R)	4/3X-HH	150SV-SP(R)	12/10G-G	8SV-AF	100D-L
6/4D-AH(R)	6/4X-HH	200SV-SP(R)	14/12G-G		150E-L
6/4E-AH(R)	6/4F-HH	250TV-SP	14/12T-G		300S-L
8/6E-AH(R)	6S-H		16/14G-G		350FF-L
8/6R-AH(R)	6S-HP		16/14TU-GH		450ST-L
10/8F-AH(R)	8/6S-H		18/16G-G
10/8ST-AH(R)	8/6S-HP		18/16TU-GH
12/10ST-AH(R)	8/6X-HP
12/10FF-AH(R)
14/12G-AH(R)
14/12ST-AH(R)
16/14TU-AH(R)
20/18TU-AH(R)

Naipu Main Pump Parts

Naipu mainly produce  : Impeller , Volute Liner , Casing , Throat Bush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange and so on.




We can develop and produce a range of pumps according to different media situation to meet different duty requirements.There are Rubber Material such as R08 , R12, R26, R33, R38,R55,S03,S12,S31,S21,S42,S51,S52 etc , Wear Resistant Metal Material such as A05,A07,A12, A33, A49, A51,A61 and etc ,Corrosion Resistant Stainless Steel Material such as 201,304, 316, 316L,C55 Duplex Austenitic-Ferritic,Alloy 20,Hastelloy etc, Ceramic lining parts especially suitable for strong abrasion and corrosion mediums,and they can be interchangeable with standard slurry pump parts Ceramic Coated Stainless Steel such as J04,J05,J21,J24,J25,J26,J27,J31 etc.,Resistant Polyurethane like U01,U38, fully meet customers' request.

We can undertake various OEM orders for pumps as well as spare parts customized according to drawings or samples.






Naipu Workshop Show:

NAIPU PUMP is a whole processing company, Start from Modeling Workshop,Casting Workshop,Heat treatment Workshop,Machining Workshop ,Assembly Workshop and Pump Testing Workshop are all by us. So we are modernization and integrated company to satisfy the requirement of the changing needs of market.

As a professional pump manufacturer,we always stick to the principle of technology and quality comes first. At NAIPU PUMP, we strictly adhere to the ISO9001 Standard and CE Certificate and other industry standards as requests.

We set various check points along the whole production line,which throughout Raw Material,Charging Material,Surface and Heat Treatment checking,Material Analysis,Spare Testing and Pump Testing etc.

We have established a strict QA and QC system,we can provide quality control records such as "Spectrum Detection" "Metallographic Microscope Inspection" "Block Test"  "Ultrasonic Flaw Detection" " Penetration Testing"etc. And related test reports to our clients if necessary, such as " Material Test Report "  " Dimensional Test Report "  " Rotor Balancing Test Report "  " NDT Test Report "  " Hardness Inspection Report " etc.


Inspection Facilities




Application on Site

Our Pumps mainly used in the below areas.

Mineral Processing / Cyclone Feed / Aggregate Processing /Chemical Slurry Service / Tailings / Secondary Grinding / Industrial Processing / Pulp and Paper /Food Processing / Ash Handling /Pipeline Transport /High Velocity Hydraulic Transport / Food Processing / Explosive Sludge in metal smelting /River and Pond Dredging / Heavy Refuse Removal /Large Particle or low NPSHA Application / Abrasive Slurries / High Density Slurries / Large particle Slurries / Sump Drainage / Wash Down /Floor drainage / Mixing / Iron Ore / Copper mine / Diamond Mine / Alumina Mine / Coal Mine / Gold Mine / Kaolin / Phosphorite /Steel Plant /Sugar / Chemical Plant / Power Plant / FGD / Frac Sand Blending / Construction / City Sewage / Dewatering / Crushing / Silver / Mill Liners / Ball Mill / Rod Mill.




FAQ

1. Q: What's your factory workshops ?
     A: Our factory manufacture include casting, machining process, lathe process, heat treatment, assembly, test and packaging etc.
          Warmly welcome to visit & inspect our factory any time.
2.Q: Could you help us if we don't know which pump model we need ?
      A: Yes, please tell me your detail requirements, Such as capacity , head ,solid density etc.

3.Q: How about your price?
     A: We are sure our price is factory price, and are of high quality for our long term cooperation.
 
4. Q: What is your Slurry Pump material ?
    A: slurry pump material high chrome alloy or rubber, super abrasive-resistant metal.
          Shaft material is stainless steel alloy.
 
5. Q:How does your factory do regarding quality control? 
    A:Quality is priority. Our factory has 15~30 QC.We always attach great importance to quality controlling from the very beginning to the very end.
     
 
6. Q: Is it easy for customers to change the parts by themselves ?
    A: Yes, the structure is simple ,customers can change it very easily. We will also supply you maintenance tools for free.
 
7. Q: How to do if the pump or parts have operation problem within the warranty?
    A:  Tell me details and show me pictures, we will send you solution at once without any hesitation.

Certificate






Contact US:

Contact Person: Karen Tan