| Customization: | Available |
|---|---|
| Max.Head: | 50-80m |
| Max.Capacity: | >400 L/min |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
FAM10147RE1 Mineral Sand Slurry Pump Parts Casting Impeller
Horizontal Slurry pump spare parts--FAM10147RE1A05 Impeller
The impeller is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.
Slurry Pump impeller material
Slurry pump Impeller part code: B1127NAA05, B1052A05, B15127NAA05, C2127A05, C2147A05, D3147NAA05, D3147A05, E4147A05, E4147A05, F6147A05, FAM8147A05, G8147A05, G10147A05, G12147A05, GAM14147A05, FG10137A05, GGH10137A05, GSH10145A05...
1) Material: A05, A07, A33, A49, A61, Cr24, Cr26, Cr27, Cr30, Cr28, Cr36...
2) Vanes from 3-6. It depending on the size of the particles in the slurry.
3) Impeller type including Close, Semi-open and Open type. Impellers are generally closed because of higher efficiencies and are less prone to wear in the front liner region. Open impellers are more common in smaller pumps or where particle blockage may be a problem or where the shear provided by an open impeller is an aid to pumping froth.
4) We can also produce the non-standard impellers for some special situations.
Pumping coarse coal
Pumping fibrous material
Reduced diameter impellers
Reduced eye impellers.
| Spare part Name | Material | Specification | HRC | Application | OEM Code |
Liners&Impellers |
Hard Metal |
High Chrome White Iron 23-30% | ≥56 | Used for higher wear conditions with pH Between 5 to 12. | A05 |
| 15/3Chrome/Moly Iron | ≥59 | With moderate erosion resistance | A07 | ||
| ULTRACHROME 28% Cr, Low C | 43 | Used for FGD and other corrosive application | A49 | ||
Rubber |
Standard Impeller Rubber | Used for superior erosive resistance required | R08 | ||
| Standard liner Rubber | Have superior erosion resistance | R26 | |||
| Natural Rubber- Reinforced | Sufficient wear life | R33 | |||
| Nature Rubber | Cut resistance to hard, sharp slurries | R55 | |||
| Expeller & Expeller Ring | Metal | ULTRACHROME 27%Cr | ≥56 | Used for higher wear conditions with pH Between 5 to 12. | A05 |
| Grey Iron | High physical strength | G01 | |||
| Stuffing Box | Metal | ULTRACHROME 27%Cr | A05 | ||
| Grey Iron | G01 | ||||
| Frame/cover plate Bearing Housing& base |
Metal |
Grey Iron | G01 | ||
| Ductile Iron | D21 | ||||
| Shaft | Metal | Carbon steel | E05 | ||
| Shaft Sleeve Lantern Ring/ Restrictor Neck Ring/ Gland Bolt |
Stainless Steel |
4Cr13 | C21 | ||
| 304ss | C22 | ||||
| 316ss | C23 | ||||
| Joint Rings & Seals | Rubber |
Butyl Rubber | S21 | ||
| EPDM Rubber | S01 | ||||
| Nitrile | S10 | ||||
| Hypalon | S31 | ||||
| Neoprene | S11/S42 | ||||
| Viton | S50 |
){kind=link}