A05 Slurry Pump Stuffing Box EAM078 / DAM078 / CAM078 / B078 / C078
Product Description
The stuffing box is used to control the product leakage from the pump along the shaft. Inside the bore of the stuffing box houses gland packings and a lantern restrictor. A tapping point in the stuffing box allows a water injection to be made into the lantern restrictor usually at a pressure of 1 bar greater than the centre of the stuffing box. Occasionally a lantern ring can be used in place of the lantern restrictor especially where the quantity of clean flushing liquid needs to be reduced to prevent the dilution the slurry being pumped.
Customer Wear and Tear Advice
A worn or pitted stuffing box bore will make shaft sealing difficult resulting in excessive leakage of either gland sealing water or slurry. The stuffing box should be replaced if the bore is suspected to be worn usually this must be done when the pump is being overhauled.
Common materials used in the manufacture of stuffing boxes is a cast iron type material but if possible I recommend that chrome alloy is used instead giving a much longer service life.
Naipu Slurry Pump Stuffing Box can totally interchange with the stuffing box of AH HH M L SP AF G Series pump model.
| Parts Code |
Pump Model |
| B078 |
1.5/1 B - AH , 2/1.5B - AH |
| C078 |
3/2CAH |
| D078 |
4/3 DAH |
| E078 |
6/4E-AH ,8-6 E- G |
| F078 |
10/8F-AH , 10/8 F -G |
| G078 |
10/8 ST-AH ,14/12 G-G |
| DH078 |
3/2D-HH |
| EH078 |
4/3 E-HH |
| FH078 |
6/4F-HH , 6S-H |
| CAM078 |
4/3CAH , |
| DAM078 |
6/4DAH |
| EAM078 |
8/6E-AH |
| DSC078 |
1.5/1BHH |
| ASC078 |
20 A - L |
| BSC078 |
50B - L |
| CSC078 |
75C - L |
| DSC078 |
100D - L |
Slurry Pump Suffing Box Material : D21, Cast Iron, High Chrome , Stainless steel C23 and etc.
Company Introduction
Shijiazhuang Naipu Pump Co., Ltd is a profeesional slurry pump and Slurry pump Spares manufacturer of above 20 years' experience, design, development, production, sales and services inosculate as a whole. The products are widely used in mining, power, metallurgy, coal, dreading, building material and other Industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
We own our casting workshop , machining workshop , assembly workshop.
We can accept OEM order .
Main Pump part:
Impeller, Volute liner, Throat bush, frame plate liner insert, frame plate, cover plate, expeller, Expeller ring, gland assembly, base, shaft sleeve, stuffing box, bearing assembly, adjust screw, clamp washer, bolt, end cover, labyrinth, keeper plate, shaft spacer
Naipu also can supply OEM service accoring to customer's drawing or sample.
NAIPU Main Pump Model:
Metal Liner Heavy Duty Slurry Pump AH TYPE
1.5/1B-AH 2/1.5B-AH 3/2C-AH 3/2CC-AH 4/3C-AH 4/3CC-AH 4/3D-AH 4/3DD-AH 6/4D-AH 6/4DD-AH 6/4E-AH 6/4EE-AH 8/6E-AH 8/6EE-AH 8/6F-AH 8/6FF-AH 8/6R-AH 10/8ST-AH 10/8F-AH 10/8FF-AH 12/10ST-AH 12/10G-AH 12/10F-AH 12/10FF-AH 14/12ST-AH 14/12G-AH 14/12FF-AH 14/12F-AH 16/14TU-AH 20/18TV-AH
Rubber Liner Heavy Duty Slurry Pump AH TYPE
1.5/1B-AHR 2/1.5B-AHR 3/2C-AHR 3/2CC-AHR 4/3C-AHR 4/3CC-AHR 4/3D-AHR 4/3DD-AHR 6/4D-AHR 6/4DD-AHR 6/4E-AHR 6/4EE-AHR 8/6E-AHR 8/6EE-AHR 8/6F-AHR 8/6FF-AHR 8/6R-AHR 10/8F-AHR 10/8X-AHR 12/10ST-AHR 14/12ST-AHR 16/14TU-AHR
Metal Liner Vertical Slurry Pump SP TYPE
40PV-SP 65QV-SP 100RV-SP 150SV-SP 200SV-SP 250SV-SP
Rubber Liner Vertical Slurry Pump SP TYPE
40PV-SPR 65QV-SPR 100RV-SPR 150SV-SPR 200SV-SPR
Metal Liner High Head slurry pump HH TYPE
1.5/1C-HH 3/2D-HH 3/2DD-HH 4/3E-HH 4/3EE-HH 6/4F-HH 6/4FF-HH 6/4x- HH 6S-H 8/6S-H 8/6X-H 6S-HP 8/6S-HP 8/6X-HP
Metal Liner (Rubber Liner)Slurry Pump M TYPE
10/8E-M(R) 10/8R-M(R)
Metal Liner (Rubber Liner)Frothy Slurry Pump AF TYPE
2QV-AF(R) 3QV-AF(R) 6SV-AF(R) 8SV-AF(R)
Metal Liner Gravel Pump G TYPE
6/4D-G 6/4DD-G 6/4E-G 8/6E-G 8/6EE-G 10/8F-G 10/8FF-G 10/8S-G 12/10F-G 12/10FF-G 12/10G-G 14/12F-G 14/12FF-G 14/12G-G 10/8S-GH 10/8F-GH 10/8FF-GH 12/10G-GH 12/10F-GH 12/10FF-GH 14/12G-G 14/12T-G 18/16 T-G
Metal Liner (Rubber Liner ) Slurry Pump L TYPE
20A-L 50B-L 50B-LR 75C-L 100D-L 150E-L 300S-L
Materials of Construction
| |
LINERS |
IMPELLERS |
CASING |
BASE |
EXPELLER |
EXPELLER RING |
SHAFT SLEEVE |
SEALS |
| Standard |
Chrome Alloy
Natural Rubber |
Chrome Alloy
Natural Rubber |
SG Iron |
SG Iron |
Chrome Alloy
or
SG Iron |
Chrome Alloy
or
SG Iron |
SG Iron |
Rubber
and
Nitrile |
| Options |
Ferralium
Hastelloy C
316 SS
W151
Polyurethane
Neoprene
Butyl
Viton
Nitrile
EPDM
Hypalon |
Ferralium
Hastelloy C
316 SS
W151
Polyurethane
Neoprene
Butyl
Nitrile
Hypalon |
SG Iron
Various grades |
MS
Fabricated
Cast Iron |
NI Resist
Ferralium
Hastelloy C
Polyurethane
316 SS
W151 |
NI Resist
Ferralium
Hastelloy C
316 SS
Rubber
W151
Polyurethane
Neoprene
Butyl
Nitrile |
EN56C
Ferralium
Hastelloy C
Titanium
316 SS
304 SS |
Ceramic
Stellite
Chrome Oxide
Nordel
Neoprene
Viton |
Company Profile
Company Profile
Naipu Pump is a professional global manufacturer of industrial pumps with more than 30 years production experience. Mainly produces various types of slurry pumps, sewage pumps, sump pumps, high chromium alloy accessories and various OEM and ODM production.Already passed the quality certification ISO9001, environmental certification ISO14001, and health Certification ISO45001. The company covers an area of more than 60,000 square meters, has 150 skilled workers, 50 professional and technical service personnel, and its products are sold all over the world. The annual output is 8,000 tons of accessories, 8,000 pumps, and annual sales of 20 million US dollars.
After years of sustainable development, Naipu has gradually upgraded to an environmentally friendly factory, with environmentally friendly resin sand machine modeling, high-efficiency casting electric furnace, heat treatment, and rough sand cleaning system. Every molding has undergone strict inspection to ensure the full brushing of the protective coating, which is the prerequisite to ensure the production of qualified castings.After passing the environmental and health certification, the workers' working environment has been improved.
Our spare parts inventory is very sufficient to ensure that each customer can replace the spare parts in the first time, and will receive sufficient size inspection and packaging before shipment.
Our Products are suitable for all slurry pumping applications - chemical, mineral processing, power generation and general industry.
NaiPu Main products
1. NAH , HH L Horizontal Slurry Pump
2. SP Vertical sump pump
3. ZJQ Submersible slurry pump
4. G Horizontal sand gravel pump
5. ZJQ Submersible sand pump
6. WS Dredging pump
7. AF Vertical Froth Pump
8 .AHF Horizontal Froth Pump
9. TL(R) Desulphurization Pump
10.Clean Water Pump
11. OEM Casting machinery wear parts
| NHA series |
L(R) ,M |
HH |
SP(R) |
G |
AF Series |
| 1.5/1B-NAH(R) |
20A-L |
1.5/1 C-HH |
40PV-SP(R) |
6/4D-G |
2QV-AF |
| 2/1.5B-NAH(R) |
50B-L(R) |
3/2D-HH |
65QV-SP(R) |
8/6E-G |
3QV-AF |
| 3/2C-NAH(R) |
75C-L |
4/3E-HH |
100RV-SP(R) |
10/8F-G |
6SV-AF |
| 4/3C-NAH(R) |
100 D-L |
4/3X-HH |
150SV-SP(R) |
10/8S-G |
8SV-AF |
| 6/4D-NAH(R) |
150E-L |
6/4F-HH |
200SV-SP |
12/10G-G |
2AHF |
| 6/4E-NAH(R) |
300S-L |
6/4X-HH |
250TV-SP |
14/12G-G |
3AHF |
| 8/6E-NAH(R) |
10/8 R-M |
6S-H |
|
14/12T-G |
4AHF |
| 8/6R-NAH(R) |
10/8 E-M |
8/6S-H |
|
16/14 G-G |
6AHF |
| 10/8F-NAH(R) |
12/10F-M |
8/6X-H |
|
16/14TU-GH |
|
| 10/8X-NAH(R) |
|
6S-HP |
|
16/14H-GH |
|
| 12/10ST-NAH(R) |
|
8/6S-HP |
|
18/16G-G |
|
| 14/12ST-NAH(R) |
|
8/6X-HP |
|
18/16 TU-GH |
|
| 16/14TU-NAH(R) |
|
|
|
|
|
| 20/18G(TU)-NAH(R) |
|
|
|
|
|
Slurry Pump Spare Parts
Main Spare Parts
Impeller, Volute Liner, Casing, ThroatBush, Frame Plate Liner Insert, Cover Plate, Frame Plate, Pump Liner Expeller, Expeller Ring,Stuffing Box, Expeller, Pump Shaft, shaft sleeve, Shaft Spacer, Bearing Assembly, Base, Stuffing Box, Gland Assembly, Bearing Housing,Lantern Ring, pump discharge pipe, flange, and so on.
Materials and Durability
Wear-Resistant Materials: Components like impellers, liners, and throat bushes are often made from high-chrome alloys, rubber, or ceramics to withstand abrasive and corrosive conditions.
Customizable Designs: Many parts can be customized based on specific operating conditions or customer requirements
OEM Service
Naipu Pump is able to process whatever pump parts and wear parts customers require. The increasing development technology of reverse engineering has further enabled the company to contra-derive the shape of a sample offered by clients and, with the help of the latest 3D imaging technology to scan the pump parts, Naipu Pump can acquire accurate drawings (based on aluminum,iron and wood model patterns) to ensure that the company's replacement parts fit 100% onto customers' pumps.
Naipu Pump understands the process and demands of the mining industry and can offer comprehensive
services tailored to customers' needs.
The material can be high chrome alloy Cr27%,Cr28% Cr30% Cr35% , A51, A61, A49,A07,C55, CD4MCU, Nature Rubber ,Stainless steel ss304 ss316 ss904, Alloy20 , Hastelloy and etc.
Application:
Mining and Mineral Processing: Handling abrasive slurries in coal, gold, copper, and iron ore mining.
Dredging and Sand Extraction: Used in river, lake, and sea dredging operations.
Power Plants: Desulphurization and ash handling systems.
Chemical Industry: Pumping corrosive and abrasive fluids.
Wastewater Treatment: Handling sludge and wastewater.
WorkShop
Shijiazhuang Naipu Pump Co., Ltd is a vertically integrated manufacturer with its own foundry workshop, machining workshop, and assembly workshop. This in-house capability allows Naipu to maintain strict quality control, reduce production lead times, and offer cost-effective solutions to clients.
Advanced Test Equipment
To ensure the products quality , each Slurry Pump and Wear parts will be inspected strictly before delivery.
Why Choose Naipu?
-
Vertical Integration: Full control over production ensures high quality and cost efficiency.
-
30 Years of Experience: Proven expertise in slurry pump manufacturing.
-
Global Reach: Trusted by clients in mining, dredging, power plants, and chemical industries worldwide.
-
Technical Support: Professional after-sales service and technical assistance.
Shijiazhuang Naipu Pump Co., Ltd is committed to delivering high-quality, cost-effective pumping solutions tailored to your needs!
Welcome to Contact Me
ShiJiaZhuang NaiPu Pump Co., Ltd
Contact person: Kitty Liu
Mobile: 86-17279837295
Shijiazhuang, Headquarters
Add.: No. 368, Xinshi North Road, Shijiazhuang, Hebei Province, China
Audited Supplier 
){kind=link}