6/4 Cvl Under Lower Levels Horizontal Pumps

• Max.Head: 80-110m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Model NO.: 6/4 C-NAH
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Wear Resistant: Anti-Corrosion
• Drive Type: Zvz/Crz/CV/DC
• Discharge Size: 1 to 18 Inch
• Capacity: 0-1000 (L/S)
• Head: 0-70m
• Transport Package: Wooden Case
• Specification: CE, ISO, SGS
• Trademark: Naipu
• Origin: China
• HS Code: 8413701090
• Production Capacity: 500sets/Month

Product Description

6/4 CVL under lower levels direction horizontal pumps

Naipu NAH(R) series centrifugal slurry pumps and spare parts can fully interchangeable with world famous brand. These pumps are of heavy duty construction, designed for continous pumping of highly abrasive and corrosive slurries. They feature a wide choice of replaceable abrasion resistant metal or molded elastomer casting liners and impellers, which are all interchangeable within a common casting assembly.

Typical Application-
Mineral Flotation Processing
Electric Factory Coal preparation
Coal Washing
Chemical medium processing
Sand and gravel handling
Effluent Handling

Product Overview 


 

Techchnical Data

 

Usage	Slurry, sewage and water
Capacity	0- 3600m³/h
Head	0-112m
Speed	up to 3200r/min
Inlet/ouetlet Size	DN25mm-DN350mm
Max Temperature	110ºC
Drive	Electric or diesel

Features:

1. Bearing assembly:  large diameter shaft with short overhang contributes to long bearing life.
2. Liners:  Easily replaceable liners are bolted, not glued to the casing for positive maintenance.
3. Casing:  Casing halves of cast or ductile iron provide high operating pressure capabilities.
4. Impeller:  Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
5. Throatbush:  Wear is reduced and maintenance simplified by the use of tapered.        



 

Pump Parts Material
 

Metal Lined Pumps		Rubber Lined Pumps
Part Description	Material Specification	Part Description	Material Specification
Base	Cast Iron	Base	Cast Iron
Shaft	4140 High Tensile Steel	Shaft	4140 High Tensile Steel
Bearing Assembly	Timken(Cast Iron Body)	Bearing Assembly	Timken(Cast Iron Body)
Shaft Sleeve	420 Stainless Steel	Shaft Sleeve	420 Stainless Steel
pump Casing	Cast Iron	pump Casing	Cast Iron
Frame Plate Liner	27% Chrome White Iron	Frame Plate Liner Insert	Rubber
Volute Liner	27% Chrome White Iron	Cover Plate Liner	Rubber
Impeller	27% Chrome White Iron	Impeller	Rubber Coated High Tensile Steel
Throat Bush	27% Chrome White Iron	Throat Bush	Rubber
Joint Ring	Rubber	Cover Plate	Cast Iron
Cover Plate	Cast Iron	Stuffing Box	Cast Iron
Stuffing Box	Cast Iron	Expeller	27% Chrome White Iron
Expeller	27% Chrome White Iron	Expeller Ring	Natural Rubber
Expeller Ring	Natural Rubber	Bolts	Zinc Plated Steel
Bolts	Zinc Plated Steel	O-rings	Nitrile Rubber
O-rings	Nitrile Rubber	Seals	Rubber
Seals	Rubber

Naipu® NP-AH METAL LINER PUMP WORK PARAMETER
Type
Typ Type

Pump Type	Allowable Mating Max.Power(kw)	Material	Clear Water Performance							Impeller
			Capacity/Q/m3/hr	Head/m	Speed(rpm)	Max Eff%			NPSH/m	Nos of Vane	Impeller Diameter/mm
1.5/1-NP-AH	15	M	12.6--28.8	6--68	1200--3800	40			2--4	5	152
		R	10.8-25.2	7-52	1400-3400	35				3
2X1.5-NP-AH	15	M	32.4--72	6--58	1200--3200		45		3.5--8	5	184
		R	25.2-54	5.5-41	1000-2600	50			2.5-5		178
3X2-NP-AH	30	M	39.6--86.4	12--64	1300--2700	55			4--6	5	214
		R	36-75.6	13-39	1300-2100	55			2-4		213
4X3-NP-AH	30	M	86.4--198	9--52	1000--2200	71			4--6	5	245
		R	79.2-180	5-34.5	800-1800	59			3-5
6X4-NP-AH	60	M	162--360	12--56	800--1550	65			5--8	5	365
		R	144-324	12-45	800-1350	65			3-5
8X6-NP-AH	300	M	360--828	10--61	500--1140	72			2--9	5	510
		R	324-720	7-49	400-1000	65			5-10
10X8-NP-AH	560	M	612--1368	11--61	400--850	71			4--10	5	686
		R	540-1188	12-50	400-750		75		4-12
12X10-NP-AH	560	M	936--1980	7--68	300--800		82		6	5	762
		R	720-1620	7-45	300-650		80		2.5-7.5
14X12-NP-AH	560	M	1260--2772	13--63	300--600		77		3--10	5	965
		R	1152-2520	13-44	300-500		79		3-8
16X14-NP-AH	1200	M	1368--3060	11--63	250--550		79		4--10	5	1067
20X18-NP-AH	1200	M	2520--5400	13--57	200--400		85		5--10	5	1370

Workshop Show

Shijiazhuang Naipu Pump Co.,Ltd is a professional manufacturer of Slurry Pumps, 
We can be in service from Mould ,Casting, Heat treatment ,Machining, Assembly,Testing etc. one dragon service.
We have our Mould Workshop,there are Wooden Mould,Aluminum Mould,Lost Foam Casting Mould,Wax Mould etc.
Naipu own Casting Workshop,mainly Sand Casting and Lost Foam Casting and Precision Casting.
Naipu own Heat treatment Workshop, after out of furnace,the hardness are according to the technical requirement.
Naipu own Machining Workshop,we are professional from rough machining to finish machining.
Naipu own Assembly Workshop, our mechanicians are skilled in assemblying as we had about 30 years experience in this area.
Naipu own  Inspection Workshop, Every order every parts we will do the test before loading.



Application
 

Heavy Mining | Mineral Processing | Sand and Gravel |Coal Prep | Cyclone Feeds | Aggregate Processing | Fine Primary Mill Grinding | Chemical Slurry Service | Tailings | Secondary Grinding | Industrial Processing | Pulp And Paper | Food Processing | Cracking Operations | Ash Handling | Pipeline Transport | High Velocity Hydraulic Transport |Food Processing | Explosive Sludge In Metal Smelting | River And Pond Dredging | Heavy Refuse Removal | Larger Particle Or Low NPSHA Applications | Continuous (Snore) Sump Pump Operation | Abrasive Slurries | High Density Slurries | Large Particle Slurries | Sump Drainage | Wash down | Floor Drainage | Mixing | Iron Ore | Cooper | Diamond | Alumina | Coal | Gold | Kaolin | Phosphorite | Steel | Palm | Suger | Chemical | Power | FGD | Frac Sand Blending | Construction | City Sewage | etc. 
 

Possible Faults and Settlements
 

Faults	Reason	Settlement
1.Pump fails to discharge any water,The hand of pressure gauge beat violently	1.Suction pipe don't have enough water. 2.Suction pipe blocked or the valve is locked.	1. Inject enough water 2.unlock the inlet valve,clear the blocks 3.Exclude the air leakage
2.The pump can't discharge water,the hand of vacuum meter beat heavily.	1.The inlet valve is unlocked or silted up. 2.The resistance of suction pipe is too big or silted up. 3.The height of suction is too high.	1.Unlock the valve or desilting  2.improve the design of  suction pipe or desilt  3.Lower the height of the installation.
3.The pump can't discharge water,pressure gauge shows heavy pressure.	1.The resistance of the discharge pipe is too big. 2.The impeller blocked 3.The speed is slow.	1.Check and adjust the outlet pipe. 2.Clear the impeller 3. Improve the speed.
4.The pump doesn't rotate	The volute is silted up by the blocks.	Clear the blocks
5.The capacity is not enough	1.The blocks of the impeller or the inlet or outlet pipe. 2.The abrasion of the impeller is heavily. 3.The speed is low to normal  4.Pump is installed unreasonably or the leakage of the inlet pipe. 5.The transporting height is too high,the loss of the resistance of the inside pipe are too big. 6.The inlet valve not open enough or blocked 7.The packing seal leaks	1.Clear the impeller or pipe. 2.Change the impeller 3.Adjust the speed 4.Install again or stop leaking.   Decrease the height of the transport or reduce the resistance. Unlock the inlet valve   Compress the packing tightly
6.The motor of the pump is overloaded	1.The head of the pump exceeds the head of the working condition. 2.Not consider the slurry density when selecting the pump. 3.The packing press tightly	1.Turn down the outlet valve,cut the impeller or lower the speed. 2.Select the motor again. 3.Adjust the the screw of the  packing gland
7.Abnormal sound in the pump, and no water out	1.The resistance of the inlet pipe is too big. 2.The height of the suction is too high. 3.Cavitation occurred  there is air in the inlet The temperature of the liquid is too high	Clear the suction pipe and sluice valve. Lower the height of the suction  Adjust the water valve and let the pump operate in the defined limits. Block the leakage. Lowering the liquid temperature.
8.pump vibrates	1.pump cavitate  2.The block of the impeller single vane  3.The no concentricity  between the pump shaft and motor shaft 4.Fasteners or foundation loose	1.Adjust the water valve ,lower the height of the installation,reduce the resistance of the inlet. 2.Clear the impeller 3.Alignment again 4.Fasten the screw,and reinforce the foundation.
9.Bearing is overheat	1.lock the cooling water 2.lubrication is not good. 3.the lubrication oil is not clear 4.the wrong direction of the thrust bearing. 5.there is something wrong with the bearing.	Open the cooling water Adjust the oil quantity  Clear the shaft,change oil According to the inlet pressure,adjust the direction of the thrust bearing. Change the bearing
10.Packing short life	The material of packing is not good	Change the packing
11.pump leak oil	1.High oil level 2.The rubber parts invalid   3.Assembly problem	1.Lower the oil level 2.Change rubber spares 3.Adjust the assembly
12 Pump head leaking	1.The rubber parts not press well	Assembly again or press tightly

What information should I offer to get pump solution?

1, Head:     m
2, Flow:    m3/h
3, Max Solid size:    mm
4, Particle shape (smooth or sharp):
5, Medium pH level:
6,Specific Gravity of the Medium:
7, Temperature:
8, Drive type:
9. Power supply: Electric or Dlesel
10, Voltage and Frequency of the Motor: 


Contact US

Contact Person: Karen Tan 


 


 
Welcome to visit our Factory !

The Main pump model of AH HH M L SP AF G Series 

AH series	L(R), M	HH	SP(R)	G	AF Series
1.5/1B-AH(R)	20A-L	1.5/1 C-HH	40PV-SP(R)	6/4D-G	2QV-AF
2/1.5B-AH(R)	50B-L(R)	3/2D-HH	65QV-SP(R)	8/6E-G	3QV-AF
3/2C-AH(R)	75C-L	4/3E-HH	100RV-SP(R)	10/8F-G	6SV-AF
4/3C-AH(R)	100 D-L	4/3X-HH	150SV-SP(R)	10/8S-G	8SV-AF
6/4D-AH(R)	150E-L	6/4F-HH	200SV-SP	12/10G-G
6/4E-AH(R)	300S-L	6/4X-HH	250TV-SP	14/12G-G
8/6E-AH(R)	10/8 R-M	6S-H		14/12T-G
8/6R-AH(R)	10/8 E-M	8/6S-H		16/14 G-G
10/8F-AH(R)		8/6X-H		16/14TU-GH
10/8X-AH(R)		6S-HP		16/14H-GH
12/10ST-AH(R)		8/6S-HP		18/16G-G
14/12ST-AH(R)		8/6X-HP		18/16 TU-GH
16/14TU-AH(R)
20/18G(TU)-AH(R)