Slurry Pump Rubber Liner Throat Bush F8083 for 10/8 E-M Pump
Naipu® direct factory of slurry pump , gravel sand pump , dredging pump and spare parts.
10/8E-M (R) Metal /Rubber Liner Slurry Pumps
Metal Liner (Rubber Liner)Slurry Pump M TYPE
10/8E-M(R) 10/8R-M(R)
Introduction:
Series NP-M slurry pump are also cantilevered, horizontal and centrifugal with double casing. It has better efficiency and high pressure than Series NP-AH and NP-L.
This series of slurry pumps have replaceable wear-resistant metal liners. Its wet parts are with throatbush, impeller, volute liner and frame plate liner insert, which are all made of high Chrome alloy and natural rubber.
Cylindrical structure is used for its bearing assembly, which is easy for adjusting the space between impeller and front liner easily, being removed completely when being repaired. Grease lubricant is applied for bearing lubrication.
It has packing seal, expeller seal and mechanical seal usually. The discharge side can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Model Explanation and Performance Chart: 10/8E-NP-M
10: Suction size (inch)
8: Discharge size (inch)
E: Frame type with maximum power
NP:SHIJIAZHUANG NAIPUMP CO.,LTD
M: Medium duty slurry Pump
Pump Model |
NP-M Series Slurry Pump Performance Chart |
Impeller Dia. (mm) |
Allowable
Max. Power (Kw) |
Clear Water Performance |
| Capacity Q |
Head
H(m) |
Speed
n(r/min) |
Max.Eff.
η% |
NPSH
(m) |
| m3/h |
l/s |
| 10/8E-NP-M |
120 |
540-1440 |
150-400 |
14-60 |
600-1000 |
73 |
4-10 |
549 |
Structure:
Spare parts for 10/8E-NP-M
Rubber Throat bush F8083
| Model |
Parts Name |
Parts Code |
Parts Material |
| 10/8E-M |
O Ring |
F064 |
NBR |
| O Ring |
E109 |
NBR |
| Shaft Sleeve |
E075 |
3CR13 |
| Shaft Spacer |
EAM117 |
4Cr13 |
| Stuffing Box |
EAM078 |
HT200 |
| Expeller |
EAM028 |
HT200 |
| Expeller Ring |
EAM029 |
HT200 |
| Base |
E003M |
HT200 |
| Lantern Ring |
E063 |
1Cr18Ni9Ti |
| Lantern Restrictor |
E118 |
1Cr18Ni9Ti |
| Neck Ring |
E067 |
1Cr18Ni9Ti |
| Gland Assembly |
E044 |
HT200 |
| Frame Plate |
EM8032 |
HT200 |
| Cover Plate |
F8013 |
HT200 |
| Impeller A07 |
F8147 |
KmTBCr15Mo3 |
| Impeller A05 |
F8147 |
KmtbcCr26 |
| Volute LinerA07 |
F8110 |
KmTBCr15Mo3 |
| Volute Liner A05 |
F8110 |
KmtbcCr26 |
| Throat Bush A07 |
F8083 |
KmTBCr15Mo3 |
| Throat Bush A05 |
F8083 |
KmtbcCr26 |
| Frame Plate Liner InsertA07 |
F8041 |
KmTBCr15Mo3 |
| Frame Plate Liner Insert A05 |
F8041 |
KmtbcCr26 |
| Volute Lifting Beam |
F8304 |
20 |
| Keeper Plate |
F8081 |
20 |
| Cover Plate Bolts |
F8015M |
45 |
| Intake Joint |
F8060 |
NR |
| Discharge Joint |
F8132XLP |
NR |
| O Ring |
F109 |
NBR |
| Volute Cover Seal |
F8124 |
NR |
| Stuffing Box Seal |
F122 |
NR |
| Bearing Housing |
E004M |
HT200 |
| End Cover |
E024 |
HT200 |
| Grease retainer |
E046 |
HT200 |
| Labyrinth |
E062 |
HT200 |
| Shaft |
EAM073M |
45 |
| Labyrinth locknut |
|
45 |
| Gland Bolts M16x55 |
|
45 |
| Clamp WasherE011 |
|
45 |
| Adjusting ScrewM24X240 |
|
45 |
| Cotters250x38 |
|
A3.A3F |
| Frame Plate StudsM24X260 |
|
45 |
| Square head setM20X130 |
|
45 |
| Key B22X185 |
|
45 |
| Bearing Assembly |
EAM005M |
45 |
Application:
Series NP-M slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.
Typical Application:
l Iron Ore Dressing Plant
l Copper Concentration Plant
l Gold Mine Concentration Plant
l Molybdenum Concentration Plant
l Potash Fertilizer Plant
l Other Mineral Processing Plants
l Alumina Industry
l Coal Washery
l Power Plant
l Sand Excavation
l Building Material Industry
l Chemical Industry
l Other industries
Workshop:
Shijiazhuang NaiPu Pump Co.,Ltd have own Foundry workshop, Machining Workshop, Assembly workshop, and advanced test equipment.
Inspection
All the products will be stringently tested to ensure the quality before delivery.
Our Service
1. Direct Factory
we are the directly Pump factory with more than 30 years pump production experience.
NaiPu has its Casting workshop, Machining workshop, Assembly Workshop. There are only few real factory , most only have assembly workshop or trader. We can control the quality better.
welcome to visit our factory anytime.
2. Excellent Product Quality.
All our workes have more 20 years experience and skilled in casting , machning and assembly industry,
We have advanced and perfect testing equipment, and strict quality inspection is required at every production link.
3.Technical Surport .
We have a group of high quality engineers with rich experience who can solve everything during the whole process. like select the right pump model , required Power , and other technicial trouble during using
4. Reasonable Price
Naipu Pump can save about 30% cost for the buyer
5.Perfect after -sales .
We will be responsible for the whole life period, No matter any trouble during using , just email me , we will help you to solve it.
6. Rich OEM Service Experience
Not only for pump and spare parts , also for other others mining wear parts. we have done many special spare parts for customer. Like Crusher spare parts , Cyclone parts , ball mill Liner . Material can be High chrome alloy , Stainless steel , Ductile Iron, Alloy 20, Hastalloy C and so on
7. Quick Reply
Your inquiry related to our products or prices will be replied within 8 hours. if urgent can call me or add wechat/ whatsapp
Welcome to contact us
ShiJiaZhuang NaiPu Pump Co.,Ltd
Contact person :Kitty Liu
Audited Supplier 
){kind=link}