| Customization: | Available |
|---|---|
| Impeller Number: | Single-Stage Pump |
| Working Pressure: | High Pressure Pump |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Shijiazhuang Naipu Pump Co.,Ltd | |||
| Pump type | Performance | Main Application | Feature |
| ZJ(R)Slurry Pump | Capacity:0-5300 m3/h | 1.Type ZJ(R) slurry pumps are cantilevered,horizontal,centrifugal pumps | |
| Head:0-70m | Minerals Flotation Processing | 2.Fully Interchange with world Famous Brand | |
| Discharge:1-18 Inch | Electric Factory Coal Preparation | 3. Made Anti wear and Anti-corrosive Material | |
| Power: Motor/Diesel | Coal Washing | 4. Can installed in multistage series | |
| Material: High Chrome alloy or Nature Rubber | Chemical Medium Processing | ||
| DriveType: ZVZ/CRZ/CV/DC | Effluent Handling | ||
| Liquid temperature up to 90°C | Sand And Gravel Handling | ||
| ZJM Medium Duty Slurry Pump | Capacity:540-1228 m3/h | Dense media transfer | 1. slurry pumps and spare parts could fully interchange with world famous brand. |
| Head:15-61m | Dense media make-up | 2. Can installed in multistage series | |
| Discharge:8 Inch | Bottom boiler and fly ash | 3. designed for continuous pumping of highly abrasive and corrosive slurries. | |
| Power: Motor/Diesel | Ferrosilicon make up | ||
| Material: High Chrome alloy or Nature Rubber | Thickener underflow | ||
| Drive Type: ZVZ/CRZ/CV/DC | Dewatering | ||
| Liquid temperature up to 90°C | |||
| ZJ(H)High Head Slurry Pump | Capacity:16.2-1008 m3/h | 4. Designed to produce high heads per stage at high Pressures. | |
| Head:25-118m | Tailings Delivery | 5. Capable of handing medium size particles and pumping at heads in excess of 90m per stage | |
| Discharge:1-6Inch | Cyclone Feed | 6. Adoptable of gland seal or expeller Seal | |
| Power: Motor/Diesel | Diamond Concentrate | 7. Can installed in multistage series | |
| Material: High Chrome alloy | Slag Granulation | ||
| Drive Type: ZVZ/CRZ/CV/DC | Bottom Boiler and Fly Ash | ||
| Liquid temperature up to 90°C | Mill Discharge | ||
| ZJD Low-Abrasive Slurry Pump | Capacity:2.34-7920 m3/h | Chemical Process | 1. Attractive initial cost. |
| Head:6-50m | Heavy Minerals | 2. High speed Operation | |
| Discharge:20-550mm | Plant Water Supply | 3. Small Volumes saving floor Area | |
| Power: Motor/Diesel | Thickener Overflow | 4. Gland Seal And Centrifugal Seal | |
| Material: High Chrome/ Rubber | Paper and Pulp | ||
| Drive Type: ZVZ/CRZ/CV/DC | Slag Granulation | ||
| ZJS(H) Gravel Pump | Capacity:36-2232m3/h | Slag Granulation | 1.Single Casing, Wide Wet Passage |
| Head:6-77m | Suction Hopper Dredging | 2.designed for continuous pumping of extremely aggressive slurries | |
| Discharge:4-14inch | Dredging | 3.Easy Installation and operation, | |
| Power: Motor/Diesel | Barge Loading | 4.Good performance of NPSH And Abrasion-resistance | |
| Material: High Chrome/NI-Hard | Sand Reclamation | 5.Type ZJSH Pump are of high head ones | |
| Drive Type: ZVZ/CRZ/CV/DC | Sugar Beet | ||
| ZJG Slurry Pump | Capacity:15.8-342.3L/S | Handling The Mixture Abrasive Solids | 1.CAD modern design,super hydraulic performance,high efficiency and lower abrasion rate |
| Head:20-100M m | Electric Power | 2.Wide passage, non-clogging and good performance of NPSH; | |
| Discharge:65-300mm | Metallurgy | 3. Free of leakage; | |
| Power: Motor/Diesel | Mine Coal | 4.Reliability design | |
| Material: High Chrome/NI-Hard | Constructional Material | 5.Can be Installed Multistage | |
| Drive Type: CRZ | Chemical Industry | ||
| Max Pressure: 3.6Mpa | |||
| ZG Slurry Pump | Capacity: 90-2400m3/h | Electric Power | 1.Used international advanced solid-liquid two-phase flow theory |
| Head:6-135mm | Constructional Material | 2.Lower noise and vibration | |
| Discharge:40-300mm | Mine Coal | 3.Long service life | |
| Power: Motor/Diesel | Coal washing | 4.concentration of weight: 45%(ash) | |
| Material: High Chrome | Sand Reclamation | 60%() | |
| Drive Type: CRZ/DCZ/ZVZ/CV | Sugar Beet | ||
| WS Dredging Pump | Capacity: 180-25000m3/h | Suction Hopper Dredging | 1.Light weight,good wear-resistant, |
| Head:25-76mm | Constructional Material | Super dredging performance | |
| Discharge:100-1000mm | Sand gravel processing | 2. Suited for the dredge on the whole construction ,high multiple economy benefits and so on . | |
| Power: Motor/Diesel | Barge Loading | 3. It throughout meets requirements of the dredge to dredging pumps | |
| Material: High Chrome | Sand Reclamation | ||
| Drive Type: DCZ | Dredging and damming of the river and sea | ||
| ZJW Feeding pumps | Capacity: 30-305m3/h | coal washery, | 1.ZJW series filter press feeding pump accept unique hydraulic design and installation mode of the impeller |
| Head:43.5-91.8mm | environmental protection, | 2.Use in the filter press feed | |
| Discharge:50-125mm | aluminum factory, | 3. large capacity, low pressure feeding | |
| Power: Motor | smelting plant etc. | and low capacity,high pressure filter. | |
| Material: High Chrome | |||
| Drive Type: DC | |||
| ZJL(R) Vertical Slurry Pump | Capacity: 5.4-247.5L/S | Sump drainage washdown | 1.Vertical, centrifugal slurry pumps submerged in sump to work. |
| Head:4.5-37m | Floor drainage | 2.No need of any shaft seal and sealing water. | |
| Discharge:40-200mm | Mill sumps | 3.Can also be operated normally for insufficient suction duties | |
| Power: Motor | Carbon transfer | ||
| Material: High Chrome/Rubber | Monitoring | ||
| Drive Type: DC/BD | Magnetite mixing | ||
| ZJQ submersible Slurry pump | Capacity: 25-2000M3/H | Delivering Liquid Sand, | 1.The pump adopts excellent material, advanced structure, and it is with wide flowing passage & strong delivery ability. |
| Head:12-60m | Coal Cinder Solid | 2.The hydraulic parts are wear-resistant. | |
| Discharge:80-400mm | Clearing The Mud In Lake, River, Sea | ||
| Power: Motor | Dredging Widening Channel | ||
| Material: Hard Metal | |||
| ZJF froth Pump | Capacity: 7.2-330 M3/H | Minerals Flotation Processing | 1.Designed for continuous pumping of highly abrasive and corrosive frothy slurries |
| Head:5-30m | Handle Frothy Slurries | 2.They have a vertical shaft configuration, and comprise a hopper, with vertical Bearing Assembly, | |
| Discharge:50-150mm | |||
| Power: Motor | |||
| Material:High Chrome/rubber | |||
){kind=link}