Naipu Vertical Centrifugal Mud Pumps Submersible Centrifugal Mud Pumps The Difference

• Max.Head: 80-110m
• Max.Capacity: 200-300 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Model NO.: ZJL ZJQ
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Usage: Pumps
• Specification: cr28 r26
• Trademark: naipu
• Origin: China
• Production Capacity: 3000pieces/Year

Product Description

1. The motor of the vertical slurry pump can be an ordinary vertical motor without waterproofing. The motor shaft and pump shaft of the submersible slurry pump are coaxial. The motor must be waterproof and sealed. The motor and the pump can be immersed in the liquid at the same time ;
2. The working position is different. The vertical slurry pump is partially immersed in the pit and cannot be completely immersed in the liquid surface. The submersible slurry pump can be completely immersed (including the motor part) below the liquid surface;

3. It is recommended to use a vertical slurry pump if the depth of the slurry is about 2 meters, and a submersible slurry pump is recommended for the depth of 2 to 200 meters.

4. The suction pipe can be added to the vertical pump separately, and the mixing system can be added to both sides of the submersible slurry pump.


Naipu® NP-SP pumps are vertical, centrifugal slurry pumps submerged in sump to work.They are designed for delivering abrasive,large particle and high density slurries.These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.Wet parts of type NP-SP pump are made of abrasion-resistant metal. All parts of type NP-SP(R) pump immersed in liquid are lined with rubber outer liner.They are suited to transport non-edge angle abrasive slurry.
NP-SP(R) Sump Pump Showing Component
 

Metal Sump Pump - NP-SP	Elastomer Sump Pump - NP-SPR

Main Part Number At The Drawing
 

1.Discharge Pipe	5.Impeller
2.Column	6.Pump Casing
3.Strainer	7.Lower Pipe
4.Back Liner

 

Column	Sp65092
Back Liner	Sp65041
Impeller	Sp65206
Pump Casing	Sp65092
Lower Pipe	Spr65116

Materials of Construction
 

	IMPELLERS	CASING	COLUMN	DISCHARGE	SEALS
Standard	High Chrome Alloy  Rubber	High Chrome Alloy  Rubber	Mild Steel Mild Steel Rubber Lined	Mild Steel Mild Steel Rubber Lined	Natural Rubber Rubber
Options	Butyl EPDM Hypalon Polyurethane 316 SS W 151	Neoprene Butyl EPDM Hypalon Nitrile 316 SS W 151	Neoprene Butyl Nitrile 316 SS	Neoprene Butyl Nitrile 316 SS	Nordel Neoprene Viton Hypalon Butyl EPDM

Key words : Vertical sump pumps Sump pump Slurry pump

 

Naipu® NP-ZJQ submersible Slurry motor pump is a kind of hydraulic mechanism which motor connects directly with pump.the pump adopts excellent material, advanced structure, and it is with wide flowing passage & strong delivery ability. The hydraulic parts are wear-resistant. The pump is yet completed with control unit. The pump set consists of main impeller and vice impeller. The main impeller is used for absorbing and delivering solid-liquid mixture, the vice impeller is used for spraying or stirring solid-liquid mixture to help the impeller delivering.

Typical Applications

Delivering Liquid Sand, Coal Cinder Solid
Clearing The Mud In Lake, River, Sea
Dredging Widening Channel

NP-ZJQ Submersible Slurry Pump Configuration Drawing

1.Power Cable	12.Oil Sealing
2.Cable Cover	13.Spacer Sleeve
3.Cable Seat	14.Casing Cover
4.Motor Cover	15.Casing
5.Thermal Sensor	16.Impeller
6.Stator	17.Wear Ring
7.Rotor	18.Strainer
8.Lower Bearing	19.Agitator
9.Float Switch	20.Impeller Cap
10.Oil Chamber	21.Base Plate
11.Mechanical Seal	22.Control Cable

Use site

The slurry pump can transport the slurry containing particles and a mixture of corrosive solids and liquids.
1. Power industry (power plant)
In China, it is mainly hydropower and thermal power generation. Thermal power plants generate a lot of ash mixed with scale through coal-fired power generation. This requires slurry pumps to clean them up, so thermal power plants also call slurry pumps ash The pump can choose the high-lift, wear-resistant ZJG series slurry pump produced by Shijiazhuang Naipu Pump Co.,Ltd.
2. Coal washing industry
Because coal blocks are relatively large, mostly solid blocks, they are very easy to block the slurry pump. The coal washing industry has very high requirements on the slurry pump. It is necessary to select a slurry pump with high flow and high passability. Shijiazhuang Naipu Pump Co. ,Ltd developed an impeller with a spacious leaf path according to customer needs, which solved the clogging problem.
3. Mining industry (mineral processing plant)
Slurry pump can be used in the mining industry. The mud particles and solid slurry in the mine cannot be removed manually, and the slurry pump can easily transport it. Due to the harsh environment of the mine, it has a great impact on the life of the slurry pump. You must choose Shijiazhuang Naipu Pump Co., Ltd. wear-resistant, high-quality ZJ series slurry pumps.

4. Dredging the river
When the river is dredging, it is time to dredge the river, and the slurry pump is also called the dredging pump. Due to the characteristics of the slurry pump, when dredging the river, the most common choice is the WSG series slurry pump.
5. Seawater sand selection
In the seawater sand dressing industry, the slurry pump is also called mud pump, mud pump, etc. The seawater sand dressing industry slurry pump transports some mud, and it is most suitable to choose G and ZJQ produced by Shijiazhuang Naipu Pump Co.,Ltd. Series slurry pump.

our service
1. According to the specific site data provided by the customer, the technical engineer will customize the high-efficiency, energy-saving pump suitable for site use and provide the name and quantity of the spare parts for one year.
2. According to the selected pump, draw up detailed technical parameter summary table and complete quotation for customers' reference.
3. After signing the contract, follow up the production process in time, and communicate with customers and solve problems in time if they encounter problems.
4. After the production of the goods is completed, check the quality and quantity of the goods according to the signed contract, prepare the shipping documents, and ship the goods at the time and place specified by the customer.
5. After the customer receives the goods, do a good job of later installation instructions.
6. Contact the customer in time in the later period, and the replacement parts need to be shipped in time.
7. Warranty period: 1 Year Warranty(except Wearing Parts)

 

Welcome your consultation···········
 

Packaging:Wooden box packaging

1. Make a suitable packaging box according to the size of the goods, with interlayer boards to prevent collisions.

2. Place it in the repacking box along with the information of the goods.

Shipping:

1.Land transportation

2.shipping

3.Air freight

Choose the transportation method according to customer needs.