Customization: | Available |
---|---|
After-sales Service: | Yes |
Warranty: | 6 Months |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Horizontal slurry pumps
Horizontal Mining Minerals Processing Dewatering Water Centrifugal Slurry Pump
Slurry pump description
AH-ZJ series slurry pump are cantilever horizontal centrifugal slurry pump.
They are widely used in industry of mining, electrical power, metallurgy, coal, environmental, etc for transportation of abrasive solid slurry.
Mud pump, impurity pump, dredge pump and desilting pump are all belong to category of slurry pump.
Material are vary from corrosion and abrasion degree, high chrome abrosion & corrosion resistance alloy Cr27MoNi, Cr30MoNi are optional.
Slurry pump advantanges are as follows:
1)High concentration, volume concentration reach to 60%, weight concentration reach to 70%;
2)Comprehensive performance is good, high head: long distance and high head transportion, single set head can reach to max 120m, and can be used in series to satisfy much higher head requirements;
3)High flow rate capacity: can be reached 3400m3/h;
4)Good passing ability:gravel pump max passing particles size is 380mm;
5)Diameter size:outlet size from 1" to 22"
6)Widely application: all slurry, mud and bad corrosive medium can be transported, widely used in industry of mining, electrical power, metallurgy,coal, construction etc.
7)High corrosion, abrasion resistance widely material optional: metal flow parts including:A05 (Cr27Mo),A33(Cr30MoNi)A49(Cr30MoNiCu)and rubber material etc. PH value 1.0-14.
8)Our company passed ISO certificate and all of our pumps pass CE certificate, comply with international standards.
9)Driving engine of motor and diesel are available;
10)Kinds of driving method satisfy different space need on site: CR, CZ, CV, ZV;
Slurry pump specifications
Type | AM Slurry pump |
Flow (m3/h) | 13-5000 |
Head (m) | 5-68 |
Power (kw) | 15-1200 |
Eff. (%) | 20-85 |
Pass Particle Size (mm) | 19-135 |
Material | High Cr Alloy, Rubber |
The reason that Horizontal slurry pump can not running:
Horizontal slurry pump in use for a period of time will appear some problems, in which the machine is not moving is a relatively common phenomenon, many users feel, difficult to solve, we will introduce the reasons for this for you:
1. The bearing is damaged, causing it to get stuck and tripping as soon as the control cabinet of the water pump is started;
2, the transfer of liquid is corrosive, and the ordinary cast iron horizontal slag slurry pump is easy to be corroded off, impeller nut is loosened after corrosion, resulting in impeller and pump body contact so that the turn is not moving;
3. There is a problem with the rotor of the motor, which makes it difficult for the motor to turn.
The maintenance of slurry pump
1, bearing water pressure, water to meet the provisions, at any time to adjust (or replace) the tightness of the packing, do not cause leakage of shaft seal slurry.And timely replacement of shaft sleeve.
2. When replacing the bearing, the bearing assembly shall be dust-free, the lubricating oil shall be clean, and the bearing temperature during the operation of the slurry pump shall generally not exceed 60-650 ºC, and the high temperature shall not exceed 750ºC
3, to ensure the coaxiality of the motor and slurry pump, to ensure that the elastic pad in the coupling is complete and correct, damaged should be replaced in time.
4. Ensure correct, firm and reliable installation of slurry pump components and pipeline system.
5, part of the slurry pump parts are vulnerable parts, in daily use to pay attention to the wear and tear of vulnerable parts, timely repair or replacement.Slag slurry pump wear parts maintenance or replacement process to ensure correct assembly, reasonable clearance adjustment, avoid tight friction phenomenon.
6. The suction pipeline system of slurry pump shall have no leakage state, and attention shall be paid to whether the suction inlet is blocked during operation.Slag slurry pump needs to deal with the medium with solid particles, so in the pump pool placed in the grille should meet the requirements of the slag slurry pump can pass through the particles, reduce the possibility of too large particles or long fiber material into the pump body causing blockage
8 differend discharge angles of slurry pumps