Naipu 65qvspr Min Place Beltpulley 3-22kw 102m3/H 30m

• Max.Head: 10-30m
• Max.Capacity: <50 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Model NO.: QV SP SPR
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Usage: Pumps
• Specification: cr28 r26
• Trademark: naipu
• Origin: China
• Production Capacity: 3000pieces/Year

Product Description

Wet parts of type ZJL pump are made of abrasion-resistant metal.

All parts of type ZJLR pump immersed in liquid are lined with rubber outer liner.They are suited to transport non-edge angle abrasive slurry.

The length of the pump shaft is: 900mm.1200mm.1500mm

Oil sump pump factory can totally interchangeable with SP/SPR series, it is a vertical cantilevered design that features hard alloy wear parts or full elastomer protection on all submerged components. This allows this pump to be used in highly corrosive applications. Available in sizes 40mm(1.5 inches) up to 250mm(10inches)

These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.

Wet parts of type ZJL pump are made of stainless steel.

All parts of type ZJLR pump immersed in liquid are lined with rubber outer liner. They are suited to transport non-edge angle abrasive slurry.

Naipu® NP-SP pumps are vertical, centrifugal slurry pumps submerged in sump to work.They are designed for delivering abrasive,large particle and high density slurries.These pumps have no need of any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.Wet parts of type NP-SP pump are made of abrasion-resistant metal. All parts of type NP-SP(R) pump immersed in liquid are lined with rubber outer liner.They are suited to transport non-edge angle abrasive slurry.

Typical Applications

Sump drainage washdown
Floor drainage
Mill sumps
Carbon transfer
Monitoring
Magnetite mixing

NP-SP(R) Sump Pump Showing Component
 

Metal Sump Pump - NP-SP

Elastomer Sump Pump - NP-SPR

 

Main Part Number At The Drawing

Column	Sp65092
Back Liner	Sp65041
Impeller	Sp65206
Pump Casing	Sp65092
Lower Pipe	Spr65116

Naipu Main Products

We can develop and produce a range of pumps according to different media situation to meet different duty requirment.
There are rubber material (R08. R12.r  26. R33. R38. R  55.S03.S12.S31.S21.S51.S52 U01 and etc). Wear resistant metal material( a 05.A07.A33. a 49. A61 and etc) .Corrosion Resistant stainless steel material (201.304.316. 316lL and etc). fully meet customers' request.
We can undertake various OEM orders for pumps as well as spare parts customized according to drawings or samples.