Naipu 24/20 Sand Pump Chrome Alloy HG20131 Pump Bowl
Naipu own Mould workshop, foundry workshop , Machining workshop and Assembly Workshop.
The hydrocyclones feature:
• High process performance efficiency
• High capacities
• Tough casings
• A wide range of wear-resistant lining options for maximum longevity
• Corrosion resistant, polyester or carbon steel housings • Exterior reinforcement • Wide range of vortex finder and spigot sizes are available • Multiple cone angles • Multiple sizes of feed chamber liner • Specialised options to further maximise efficiency
Sand Suction Water Pump Wear Parts
We had produced High Chrome alloy Cr27% Cylone spare parts accoroding customer's drawing successfully.
H18137DPT2A61, U18110TL1A05, HGHP24131A08,UGHPP24083TA05, UGHPP24041A05, UGHPP24083TA05, UGHPP24083TA05, HGHP24131A08, UGHPP24145TA05, UGHPP24083TA05, UGHPP24041A05, UGHP24131A08, UGHPP24145TA05, UGHPP24083TA05, UGHPP24041A05, H18137DPT2A05, U18110TL1A05, U18083DPT2MA61, U18041TL1MA05
HG20131A05, HG20130A05, HG20041A05
OEM Service
Based on many years of rich experience in slurry pump manufacturing and design, NAIPU can undertake OEM customization for the whole set of pump and various spare parts. The slurry pump spare parts can be made of various material according to customer's requirement, Such as : MA05, A07,Alloy 20, Hastelloy Alloy , A61 and so on.
Our company undertakes the design, processing and transformation of various special pump parts. According to the user's requirements, Naipu Factory can manufacture various materials and components to meet the needs of different working conditions. Or in accordance with user requirements on the existing equipment technology transformation, combined with our company's rich hydraulic model, through advanced computer simulation technology, to provide users with a complete and effective solution.
The pump body, impeller, front liner, rear liner, anti-wear ring and other parts made by our company have good results at the site and have excellent performance. They have been recognized by users and established long-term partnerships.
Material:
We also can produce others material spare parts according to customer's request.
| Code |
Material # |
Hardness
HRC |
Performance |
Application |
| MA05 |
KmTBCr26 |
≥56 |
Ranks second only to A07 in abrasion-resistant performance; fair corrosion-resistant performance. |
High impact load abrasion condition; PH rate ranging from 5 to 12 |
| A07 |
KmTBCr15Mo3 |
≥59 |
Best abrasion-resistant performance; corrosion-resistant performance is inferior to A05 |
High impact load abrasion condition |
| A11 |
KmTBCrMnMo3 |
38-42 |
Mild corrosion-resistant; lower hardness; drilling and tapping operations are applicable. |
Fine particles with light abrasion. |
| A33 |
|
≥35 |
Abrasion-resistant performance is close to A03; fair corrosion-resistant performance |
Oxide slurry with PH rate no less than 1, like phosphor-gypsum in phosphate fertilizer plant, nitric acid, sulph-oacid and phosphoric acid, etc. |
| A49 |
|
≥43 |
Fair abrasion-resistant performance, close to A03; fair corrosion-resistant performance in media with lower PH rate. |
Corrosion conditions with low PH rate, especially for flue gas and FGD devices for media of PH≥4; general suitable for lower acid condition. |
| A12 |
|
≥62 |
Higher abrasion-resistant performance than A05; fair corrosion-resistant performance; suitable for media with PH rate is 6-16, where A05 is not suitable. |
High abrasive slurry with fine particles. |
| A61 |
|
63-68 |
Optimized abrasion-resistant performance than A12 |
High abrasive slurry with fine particles. |
Contact me
Contact person :Katherine Hou
Shijiazhuang, Headquarters
Add.:No.368, Xinshi North Road, Shijiazhuang, Hebei Province, China
Welcome to contact me for more
Audited Supplier 
){kind=link}
){kind=link}