| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | Yes |
|
Still deciding? Get samples of US$ 3000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The range of TC Pumps is designed specifically for continuous use in slurry type applications with larger or breakage sensitive particles.
This range of vortex pumps is capable of handling large as well as very soft particles, especially where particle degradation is of concern.
The large volume internal profiles, combined with the recessed open impeller design, reduce particle interaction and limit potential blockages.
Design and Unique Features
1. The unlined all-metal design of the wet-end components is suitable for both horizontal and vertical design configurations.
2. The unique recessed impeller design sets up an internal vortex, which transfers the energy to the medium being pumped. This "soft" transfer of energy limits the amount of particle degradation significantly when compared to conventional pumps.
3. Equally sized inlets and outlets determine the maximum particle size that the pump can handle limiting potential blockages that could arise when pumping large particles.
4. The large volume casing design reduces velocities further decreasing wear and particle degradation.
5. Robust bearing assemblies, consisting of heavy-duty taper rollers, minimum shaft overhang and rigid large diameter shafts contribute to trouble free operation on both horizontal and vertical configurations.
| Type | Allowable Mating Max. Power (Kw) |
Clear Water Performance |
Impeller | ||||||
| Capacity/ Q m³/hr |
Head/m | Speed/rpm | Max Efficiency /% |
NPSH/m |
Nos of Vane |
Diameter /mm |
|||
| 2/2TC | 15 | 12.6-28.8 | 6-68 | 1200-3800 | 40 | 2-4 | 8 | 280 | |
| 3/3TC | 15 | 32.4-72 | 6-58 | 1200-3200 | 45 | 3.5-8 | 8 | 356 | |
| 4/4TC | 30 | 39.6-86.4 | 12-64 | 1300-2700 | 55 | 4-6 | 8 | 214 | |
| 6/6TC | 30 | 86.4-198 | 9-52 | 1000-2200 | 71 | 4-6 | 8 | 245 | |
| 8/8TC | 60 | 162-360 | 12-56 | 800-1550 | 65 | 5-8 | 8 | 365 | |
| 10/10TC | 300 | 360-828 | 10-61 | 500-1140 | 72 | 2-9 | 8 | 510 | |
| 032: Frame Plate 060: Intake Joint 132: Discharge Joint 083: Throatbush 110: Volute Liner 147: Impeller |
122: Stuffing Box Seal 036: Frame Plate Liner 013: Cover Plate 018: Cover Plate Liner 124: Volute Liner Seal 041: Frame Plate Liner Insert |
| LINERS | IMPELLERS | CASING | BASE | EXPELLER | EXPELLER RING | SHAFT SLEEVE | SEALS | |
| Standard | Chrome Alloy Natural Rubber |
Chrome Alloy Natural Rubber |
SG Iron | SG Iron | Chrome Alloy or SG Iron |
Chrome Alloy or SG Iron |
SG Iron | Rubber and Nitrile |
| Options | Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Viton Nitrile EPDM Hypalon |
Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Nitrile Hypalon |
SG Iron Various grades |
MS Fabricated Cast Iron |
NI Resist Ferralium Hastelloy C Polyurethane 316 SS W151 |
NI Resist Ferralium Hastelloy C 316 SS Rubber W151 Polyurethane Neoprene Butyl Nitrile |
EN56C Ferralium Hastelloy C Titanium 316 SS 304 SS |
Ceramic Stellite Chrome Oxide Nordel Neoprene Vito |
){kind=link}