Naipu Vertical Centrifugal Sump Pump with Rubber or Metal Liner

• Customization: Available
• Max.Head: 30-50m
• Max.Capacity: >400 L/min
• Model NO.: sp
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Suction Centrifugal
• Impeller: Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Slurry Pump
• Cerificate: Ce ISO SGS
• Wet End Material: A05, R55
• Warranty: 1year
• MOQ: 1 Set
• Transport Package: Packed with Wooden Box or as Customer′s Request
• Specification: 40PV
• Trademark: Naipu Or OEM
• Origin: China
• HS Code: 8413709990
• Production Capacity: 20000

Product Description

Vertical Centrifugal Sump Water Pump with Rubber or Metal Liner
High Capacity Submersible Water Vertical Centrifugal Pump With Rubber Liner 

 

1. Vertical type single stage centrifugal slurry pumps

2. Application for sump pumping, Single stage pump

NP-SP(R) centrifugal slurry pumps are mainly used to pump high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc.

Sump pump specification:

D: 40-200 mm

Q: 17-891 mm

H: 4-37 m

Slurry Pump Function: 

1. Wear-resistant metal, the impeller selection of wear-resistant metal or rubber material.

2. NP-SP(R) type sump pump parts, immersed in liquid rubber lining.

3. Different length of the pump drive shaft or inhaled could be selected

4. V-belt drive, direct drive, and flexible coupling.

5. Bearing to lubricate oils.

6.  use of variable speed, the best condition in the pump operation, long service life, run- effective,meet many bad transportation conditions.

 

Vertical Slurry Pump Performance Parameter:

Type	Allowable Max. Power (Kw)	Range  Of  Performance					Impeller
		Capacity		Head m	Speed rpm	Max Efficiency %	No. of Vanes	Diameter mm
		m³/hr	L/S
40 PV-SP	15	19.44-43.2	5.4-12	4.5-28.5	1000-2200	40	5	188
65 QV-SP	30	23.4-111	6.5-30.8	5-29.5	700-1500	50	5	280
100 RV-SP	75	54-289	15-80.3	5-35	500-1200	56	5	370
150 SV-SP	110	108-479.16	30-133.1	8.5-40	500-1000	52	5	450
200 SV-SP	110	189-891	152.5-247.5	6.5-37	400-850	64	5	520
250 TV-SP	200	261-1089	72.5-302.5	7.5-33.5	400-750	60	5	575
300 TV-SP	200	288-1267	80-352	6.5-33	350-700	50	5	610
40 PV-SPR	15	17.28-39.6	4.8-11	4-26	1000-2200	40	5	188
65 QV-SPR	30	22.5-105	6.25-29.15	5.5-30.5	700-1500	51	5	280
100 RV-SPR	75	64.8-285	18-79.2	7.5-36	600-1200	62	5	370

Vertical Pump Construction Drawing:


Possible faults and removal:

Type AH(R) series pump has a compact construction. If it is correctly installed and operated, the pump will have a long life.

Faults	Reason	Removal
Pump fails to discharge any liquid.	Air leaking into suction or gland Incorrect direction of pump rota- tion and impeller worn. Suction pipe blocked	Sealed leakage. Check direction of rotation and replacing a new impeller. Removal lockage.
Shaft Power consumption is excessive	Gland excessively tightened against packing rings. Rotating component is rubbing on a stationary part. Bearing worn. Drive belt tension too tight Flow rate too large Pump speed and ratio too high. Misalignment or unparallel of drive shaft and pump shaft.	Loosen gland bolts. Removal the rubbed part. Replace the bearing Adjusting belt. Modifying the pump duty and speed. Adjusting drive and pump shaft.
Bearing is over hearing	Lubricants too much or less. Containing impurities in the lubricant Bearing worn.	Lubricating as requirements. Replace clean lubricant. Replace new bearing.
Bearing has short life.	Misalignment or unparallel of drive and pump shaft. Shaft bent. Impeller unbalanced due to wear. Foreign object entered into the bearing or insufficient lubrication. Incorrect procedure followed in fitting bearings.	Adjusting drive and pump shaft. Replacing shaft. Remove rubbing and replacing new impeller Clean the bearing. Replacing or refitting the bearings.
Excessive leakage from stuffing box	Packing rings excessive worn. Shaft sleeve worn. Dirty sealing water.	Replace new packing rings. Replace shaft sleeve. Change clean sealing water.
Pump vibrates or is noisy.	Bearings worn. Impeller unbalanced. Air entered into suction pipe or blocked. Flow rate is none-uniform and pump not primed.	Replaced by new bearings. Replaced by new impeller. Discharge air and remove block. Improve on the pump feeding.

More Pump Show:





Contact Person:

Katherine Hou