100RV-SP Chrome Alloy Vertical Spindle Slurry Pump
We are one of largest factory of slurry pump, sand gravel pump, sump pump, dredging pump and wear parts located in shijiazhuang, China.
Main Model for Sump pump: 40PV-SP, 40PV-SPR, 65QV-SP, 65QV-SPR, 100RV-SP, 100RV-SPR, 150SV-SP, 150SV-SPR
The Main part: Shaft, Bearing, Bearing Hosing, bearing spacer, bering, shim, column, strainer, back liner, impeller, pump casing, lower strainer, discharge pipe
100RV-SP Chrome Alloy Vertical Spindle Slurry Pump
Size: 100mm
Capacity: 40-289m3/h
Head: 5-36m
Speed: 500-1200rpm
Eff.: 62%
Power: Max.75kw
Handling solids: 32mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
NP-SP SUMP PUMP PERFORMANCE PARAMETERS
| Type |
Allowable Mating Max. Power(Kw) |
Range Of Performance |
Impeller |
| Capacity/Q |
Head/m |
Speed/rpm |
Max Efficiency/% |
No. of Vanes |
Impeller Diameter/mm |
| m³/hr |
L/S |
| 40PV-NP-SP |
15 |
19.44-43.2 |
5.4-12 |
4.5-28.5 |
1000-2200 |
40 |
5 |
188 |
| 65QV-NP-SP |
30 |
23.4-111 |
6.5-30.8 |
5-29.5 |
700-1500 |
50 |
5 |
280 |
| 100RV-NP-SP |
75 |
54-289 |
15-80.3 |
5-35 |
500-1200 |
56 |
5 |
370 |
| 150SV-NP-SP |
110 |
108-479.16 |
30-133.1 |
8.5-40 |
500-1000 |
52 |
5 |
450 |
| 200SV-NP-SP |
110 |
189-891 |
152.5-247.5 |
6.5-37 |
400-850 |
64 |
5 |
520 |
| 250TV-NP-SP |
200 |
261-1089 |
72.5-302.5 |
7.5-33.5 |
400-750 |
60 |
5 |
575 |
| 300TV-NP-SP |
200 |
288-1267 |
80-352 |
6.5-33 |
350-700 |
50 |
5 |
610 |
Feature
The SP(R) series heavy duty cantilever sump slurry pump are designed for the fluid in the sump or pit when the normal waste vertical pump not handling, it is the vertical centrifugal slurry pump for the abrasive and corrosive slurry transporting. It is the single stage, double suction, cantilever heavy duty pump. It dont need the shaft seal and no submerged bearings. The hard metal and elastomer parts (rubber parts) are optional for different applications and interchangeable, which make the SP(R) series vertical centrifugal slurry pumps to be suitable most conditions where you need pump the slurry pump from the pit or sump.
Vertical Slurry Pump Structure Drawing
•
Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.
The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.
•
Column Assembly - Completely fabricated from mild steel. The TPR model is elastomer covered.
•
Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from
moulded elastomer for the TPR.
•
Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.
•
Upper Strainer - Drop-in metal mesh, snap-on elastomer or polyurethane for TP and TPR pumps. Strainers fit in column openings.
•
Lower Strainer - Bolted metal or polyurethane for TP, moulded snap-on elastomer for TPR.
•
Discharge Pipe - Metal for TP, elastomer covered for TPR. All wetted metal parts are completely rust protected.
•
Submerged Bearings - None
•
Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.
•
Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
100RV-SP Chrome Alloy Vertical Spindle Slurry Pump
| Pump Model |
Name |
Material |
| 100RV-SP |
Impeller SP10206 |
A05 |
| Casing SP10092 |
A05 |
| Back Liner SP10041 |
A05 |
| O ring RV217 |
Rubber |
| End cover gasket RV025 |
Rubber |
| Oil seal Rv089 |
Rubber |
| O Ring RV064 |
Rubber |
| Flinger RV184 |
Rubber |
| Volute Liner Seal E4124 |
Rubber |
| Discharge seal SP10204 |
Rubber |
| Intake Seal:SP10060 |
Rubber |
| Strainer SP10116 |
Rubber |
| Lower SP10116L |
G01 |
| Discharge PipeRV10154 |
20# Steel |
Vertical Slurry Pump Application
NaiPu® Vertical Spindle Pumps are available in a wide range of popular sizes to suit most pumping applications:
• Minerals processing
• Coal preparation
• Chemical processing
• Effluent handling
• Abrasive and/or corrosive slurries
• Large particle sizes
• High density slurries
• Sand and gravel
and almost every other tank, pit or hole-in-theground slurry handling situation.
Company Profile
Company Profile
Naipu Pump is a professional global manufacturer of industrial pumps with more than 30 years production experience. Mainly produces various types of slurry pumps, sewage pumps, sump pumps, high chromium alloy accessories and various OEM and ODM production.Already passed the quality certification ISO9001, environmental certification ISO14001, and health Certification ISO45001. The company covers an area of more than 60,000 square meters, has 150 skilled workers, 50 professional and technical service personnel, and its products are sold all over the world. The annual output is 8,000 tons of accessories, 8,000 pumps, and annual sales of 20 million US dollars.
After years of sustainable development, Naipu has gradually upgraded to an environmentally friendly factory, with environmentally friendly resin sand machine modeling, high-efficiency casting electric furnace, heat treatment, and rough sand cleaning system. Every molding has undergone strict inspection to ensure the full brushing of the protective coating, which is the prerequisite to ensure the production of qualified castings.After passing the environmental and health certification, the workers' working environment has been improved.
Our spare parts inventory is very sufficient to ensure that each customer can replace the spare parts in the first time, and will receive sufficient size inspection and packaging before shipment.
Our Products are suitable for all slurry pumping applications - chemical, mineral processing, power generation and general industry.
NaiPu Main products
1. NAH , HH L Horizontal Slurry Pump
2. SP Vertical sump pump
3. ZJQ Submersible slurry pump
4. G Horizontal sand gravel pump
5. ZJQ Submersible sand pump
6. WS Dredging pump
7. AF Vertical Froth Pump
8 .AHF Horizontal Froth Pump
9. TL(R) Desulphurization Pump
10.Clean Water Pump
11. OEM Casting machinery wear parts
| NHA series |
L(R) ,M |
HH |
SP(R) |
G |
AF Series |
| 1.5/1B-NAH(R) |
20A-L |
1.5/1 C-HH |
40PV-SP(R) |
6/4D-G |
2QV-AF |
| 2/1.5B-NAH(R) |
50B-L(R) |
3/2D-HH |
65QV-SP(R) |
8/6E-G |
3QV-AF |
| 3/2C-NAH(R) |
75C-L |
4/3E-HH |
100RV-SP(R) |
10/8F-G |
6SV-AF |
| 4/3C-NAH(R) |
100 D-L |
4/3X-HH |
150SV-SP(R) |
10/8S-G |
8SV-AF |
| 6/4D-NAH(R) |
150E-L |
6/4F-HH |
200SV-SP |
12/10G-G |
2AHF |
| 6/4E-NAH(R) |
300S-L |
6/4X-HH |
250TV-SP |
14/12G-G |
3AHF |
| 8/6E-NAH(R) |
10/8 R-M |
6S-H |
|
14/12T-G |
4AHF |
| 8/6R-NAH(R) |
10/8 E-M |
8/6S-H |
|
16/14 G-G |
6AHF |
| 10/8F-NAH(R) |
12/10F-M |
8/6X-H |
|
16/14TU-GH |
|
| 10/8X-NAH(R) |
|
6S-HP |
|
16/14H-GH |
|
| 12/10ST-NAH(R) |
|
8/6S-HP |
|
18/16G-G |
|
| 14/12ST-NAH(R) |
|
8/6X-HP |
|
18/16 TU-GH |
|
| 16/14TU-NAH(R) |
|
|
|
|
|
| 20/18G(TU)-NAH(R) |
|
|
|
|
|
Slurry Pump Spare Parts
Main Spare Parts
Impeller, Volute Liner, Casing, ThroatBush, Frame Plate Liner Insert, Cover Plate, Frame Plate, Pump Liner Expeller, Expeller Ring,Stuffing Box, Expeller, Pump Shaft, shaft sleeve, Shaft Spacer, Bearing Assembly, Base, Stuffing Box, Gland Assembly, Bearing Housing,Lantern Ring, pump discharge pipe, flange, and so on.
Materials and Durability
Wear-Resistant Materials: Components like impellers, liners, and throat bushes are often made from high-chrome alloys, rubber, or ceramics to withstand abrasive and corrosive conditions.
Customizable Designs: Many parts can be customized based on specific operating conditions or customer requirements
OEM Service
Naipu Pump is able to process whatever pump parts and wear parts customers require. The increasing development technology of reverse engineering has further enabled the company to contra-derive the shape of a sample offered by clients and, with the help of the latest 3D imaging technology to scan the pump parts, Naipu Pump can acquire accurate drawings (based on aluminum,iron and wood model patterns) to ensure that the company's replacement parts fit 100% onto customers' pumps.
Naipu Pump understands the process and demands of the mining industry and can offer comprehensive
services tailored to customers' needs.
The material can be high chrome alloy Cr27%,Cr28% Cr30% Cr35% , A51, A61, A49,A07,C55, CD4MCU, Nature Rubber ,Stainless steel ss304 ss316 ss904, Alloy20 , Hastelloy and etc.
Application:
Mining and Mineral Processing: Handling abrasive slurries in coal, gold, copper, and iron ore mining.
Dredging and Sand Extraction: Used in river, lake, and sea dredging operations.
Power Plants: Desulphurization and ash handling systems.
Chemical Industry: Pumping corrosive and abrasive fluids.
Wastewater Treatment: Handling sludge and wastewater.
WorkShop
Shijiazhuang Naipu Pump Co., Ltd is a vertically integrated manufacturer with its own foundry workshop, machining workshop, and assembly workshop. This in-house capability allows Naipu to maintain strict quality control, reduce production lead times, and offer cost-effective solutions to clients.
Advanced Test Equipment
To ensure the products quality , each Slurry Pump and Wear parts will be inspected strictly before delivery.
Why Choose Naipu?
-
Vertical Integration: Full control over production ensures high quality and cost efficiency.
-
30 Years of Experience: Proven expertise in slurry pump manufacturing.
-
Global Reach: Trusted by clients in mining, dredging, power plants, and chemical industries worldwide.
-
Technical Support: Professional after-sales service and technical assistance.
Shijiazhuang Naipu Pump Co., Ltd is committed to delivering high-quality, cost-effective pumping solutions tailored to your needs!
Welcome to Contact Me
ShiJiaZhuang NaiPu Pump Co., Ltd
Contact person: Kitty Liu
Mobile: 86-13032609126
Shijiazhuang, Headquarters
Add.: No. 368, Xinshi North Road, Shijiazhuang, Hebei Province, China
Related Slurry Sand Pumps
Related pump
Horizontal Slurry Pump
Main Pump Model: 1.5/1,2/1.5,3/2,4/3,6/4,8/6,10/8,12/10,14/12,
18/16,20/18
Discharge Diameters 1″ to 18″ (25mm to 450mm)
Pump Heads Max to 390ft (118m)
Flow Rates Max to 24000 gpm (5400m3/h)
Horizontal slurry pumps are cantilevered , horizontal, centrifugal double casing slurry pumps.
They are designed for hyper heavy duty applications such as mill discharge, process plant, coal washing, dregding sands, tailings and high pressure pipelines, as well as other specialty applications
Typical Application
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling
Vertical Slurry Pump
Main Pump Model:40PV-SP 65QV-SP 100RV-SP 150SV-SP 200SV-SP 250SV-SP
Discharge Diameters 1.5″ to 10″ (40mm to 250mm)
Pump Heads Max to 160ft (50m)
Flow Rates Max to 6,000gpm (1,350m3/h)
NaiPu-ZJL(SP)Series slurry pumps are designed for handling abrasive and corrosive slurries whilst submerged in sumps or pit. The pump has no shaft seal, easy to maintenance and cost less. Hard metal and rubber parts are optional for different applications and interchangeable. Suit for most applications where sump slurry pumps are needed.
Typical Application
Sump drainage washdown
Floor drainage
Mill sumps
Carbon transfer
Monitoring
Magnetite mixing
Gravel Sand Pump
Main Model :6/4D-G 8/6E-G 10/8F-G 10/8S-G 12/10G-G 14/12G-G 10/8S-GH 10/8F-GH 12/10G-GH 18/16 T-G
Discharge Size: 100-400mm(4inch to 16inch)
Capacity: 180-4000 (m³/h)
Head: 25-76(m)
G(H) Gravel Sand Pump are designed for continuous pumping of highly abrasive slurries that containing large particles which other Atlas pumps can not handle, Large passage inside casing make
it the best choice for gravel, dredging and other applications where large particles needed to be handled, especially for big flow, high concentration, high head media. Low NPSH requirement and robust design ensures long life under severe duties.
Typical Application
Slag Granulation
Suction Hopper Dredging
Dredging
Barge Loading
Sand Reclamation
ZJQ Submersible slurry pump
Main Model: ZJQ20-30-5.5,ZJQ 100-10-7.5 ,ZJQ50-21-11,ZJQ50-26-15,ZJQ 100-25-22,ZJQ500-20-75,ZJQ2000-35-315, etc
Discharge Size: 80mm-400mm
Capacity: 25m3/h-2000m3/h
Head: 12m-60m
Naipu® NP-ZJQsubmersible Slurry motor pump is a kind of hydraulic mechanism which motor connects directly with pump.the pump adopts excellent material, advanced structure, and it is with wide flowing passage & strong delivery ability. The hydraulic parts are wear-resistant. The pump is yet completed with control unit.
Typical Applications---
Delivering Liquid Sand, Coal Cinder Solid
Clearing The Mud In Lake, River, Sea
Drging Widening Channel
Froth Slurry Pump
Main Pump Model:2QV-AF(R) 3QV-AF(R) 6SV-AF(R) 8SV-AF(R) ,2CAHF, 3DAHF, 6EAHF
Discharge Size: 50mm-150mm
Capacity: 7.2m3/h-330m3/h
Head: 5m-30m
Naipu® NP-AFfroth pumps are of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. They have a vertical shaft configuration, and comprise a hopper, with vertical Bearing Assembly, and Type'NP-AH' pump wet-end. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casing liners and Impellers.
Typical Applications---
Minerals Flotation Processing
Handle Frothy Slurries
Audited Supplier 
){kind=link}