900mm - 1500mm Vertical long Axial Slurry Pump
Naipu® factory of slurry pump , gravel sand pump , dredging pump and spare parts.
Vertical Slurry Pump
Tech Date:
1. Name: NP-SP Vertical Sump Pump
2. Pump Type: Vertical centrifugal slurry pumps
3. Drvie Type: BD/DC
4. Power: Motor
5. Discharge Size: 40mm-200mm
6. Capacity: 5.4-247.5 l/s
7. Head: 4.5m-37m
Type Notation:
40PV-NP-SP
40 : Discharge Size
PV--- Base Type
NP--- ShiJiaZhuang NaiPu Pump Co.,Ltd
SP----- Sump Slurry Pump
NP-SP SUMP PUMP PERFORMANCE PARAMETERS
| Type |
Allowable Mating Max. Power(Kw) |
Range Of Performance |
Impeller |
| Capacity/Q |
Head/m |
Speed/rpm |
Max Efficiency/% |
No. of Vanes |
Impeller Diameter/mm |
| m³/hr |
L/S |
| 40PV-NP-SP |
15 |
19.44-43.2 |
5.4-12 |
4.5-28.5 |
1000-2200 |
40 |
5 |
188 |
| 65QV-NP-SP |
30 |
23.4-111 |
6.5-30.8 |
5-29.5 |
700-1500 |
50 |
5 |
280 |
| 100RV-NP-SP |
75 |
54-289 |
15-80.3 |
5-35 |
500-1200 |
56 |
5 |
370 |
| 150SV-NP-SP |
110 |
108-479.16 |
30-133.1 |
8.5-40 |
500-1000 |
52 |
5 |
450 |
| 200SV-NP-SP |
110 |
189-891 |
152.5-247.5 |
6.5-37 |
400-850 |
64 |
5 |
520 |
| 250TV-NP-SP |
200 |
261-1089 |
72.5-302.5 |
7.5-33.5 |
400-750 |
60 |
5 |
575 |
| 300TV-NP-SP |
200 |
288-1267 |
80-352 |
6.5-33 |
350-700 |
50 |
5 |
610 |
1)Features:
1. Naipu® NP-ZJL pumps are vertical, centrifugal slurry pumps submerged in sump to work.
2. They are designed for delivering abrasive, large particle and high density slurries.
3. These pumps have no need of any shaft seal and sealing water.
4. They can also be operated normally for insufficient suction duties.
5. Wet parts of type NP-ZJL pump are made of abrasion-resistant metal.
6. All parts of type NP-ZJL(R) pump immersed in liquid are lined with rubber outer liner. They are Suited to transport non-edge angle abrasive slurry.
2)Application:
1. Sump drainage washdown
2. Floor drainage
3. Mill sumps
4. Carbon transfer
5. Monitoring
6. Magnetite mixing
3)Construction
Spare parts for Vertical slurry Pump
Main Vertical slury pump Parts Code
| No. |
Part Name |
Material |
Part No. |
40PV-SPR |
QTY |
65QV-SPR |
QTY |
100RV-SPR |
QTY |
150RV-SPR |
QTY |
| 1 |
Bearing Housing |
D |
004 |
PV004 |
1 |
QV004-1 |
1 |
RV004-1 |
1 |
SV004-1 |
1 |
| 2 |
Bearing Sleeve |
- |
008 |
PV008 |
1 |
QV008 |
1 |
RV008 |
1 |
SV008 |
1 |
| 3 |
Bearing |
- |
009 |
P009 |
1 |
Q009 |
2 |
R009 |
2 |
S009 |
1 |
| 4 |
Bearing |
- |
009D |
P009D-1 |
1 |
Q009D-1 |
1 |
R009D-1 |
1 |
S009D-1 |
1 |
| 5 |
Mounting Plate |
S |
019 |
PV4019 |
1 |
QV65019 |
1 |
RV10019 |
1 |
SV15019 |
1 |
| 6 |
End Cover |
D |
024 |
PV024 |
1 |
QV024 |
1 |
RV024 |
1 |
SV024 |
1 |
| 7 |
Low End Cover |
S |
024L |
PV024L |
1 |
QV024L-1 |
1 |
RV024L-1 |
1 |
SV024L-1 |
1 |
| 8 |
Key |
S |
- |
PV070 |
1 |
QV070 |
1 |
RV070 |
1 |
SV070 |
1 |
| 9 |
Washer |
S |
- |
45 |
1 |
60 |
1 |
85 |
1 |
105 |
1 |
| 10 |
Shim Set |
- |
025 |
PV025 |
1 |
QV025 |
1 |
RV025 |
1 |
SV025 |
1 |
| 11 |
Nipple |
S |
- |
M10X1 |
2 |
M10X1 |
2 |
M10X1 |
2 |
M10X1 |
2 |
| 12 |
Name Plate |
- |
- |
- |
1 |
- |
1 |
- |
1 |
- |
1 |
| 13 |
Rivet |
S |
- |
- |
4 |
- |
4 |
- |
4 |
- |
4 |
| 14 |
Back Liner |
- |
041 |
SP4041 |
1 |
SP65041 |
1 |
SP10041 |
1 |
SP15041 |
1 |
| 15 |
Suction Joint |
- |
060 |
SP4060 |
1 |
SP65060 |
1 |
SP10060 |
1 |
SP15060 |
1 |
| 16 |
Lock Nut |
S |
061 |
PV061 |
1 |
QV061 |
1 |
RV061 |
1 |
SV061 |
1 |
| 17 |
Labyrinth |
S |
062 |
PV062 |
1 |
QV062 |
1 |
RV062 |
1 |
SV062 |
1 |
| 18 |
Nipple 45 |
S |
- |
M10X1 |
1 |
M10X1 |
1 |
M10X1 |
1 |
M10X1 |
1 |
| 19 |
O Ring |
D |
064 |
PV064 |
1 |
QV064 |
1 |
RV064 |
1 |
SV064 |
1 |
| 20 |
Shaft |
S |
073 |
PV4073 |
1 |
QV65073 |
1 |
RV10073 |
1 |
SV15073 |
1 |
| 21 |
Shaft Sleeve Ejector |
- |
077 |
PV077 |
1 |
QV077 |
1 |
RV077 |
1 |
SV077 |
1 |
| 22 |
Bearing Seal |
- |
089 |
PV089 |
1 |
QV089 |
1 |
RV089 |
1 |
SV089 |
1 |
| 23 |
Casing |
- |
092 |
SP4092 |
1 |
SP65092 |
1 |
SP10092 |
1 |
SP15092 |
1 |
| 24 |
Column |
- |
102 |
PV4102 |
1 |
QV65102 |
1 |
RV10102 |
1 |
SV15102 |
1 |
| 25 |
Piston Ring |
S |
108 |
P108 |
2 |
Q108 |
2 |
R108 |
2 |
S108 |
2 |
| 26 |
End Cover Set Screw |
S |
- |
N027M |
12 |
D027M |
12 |
S027M |
12 |
S027M-1 |
12 |
| 27 |
Strainer |
- |
116 |
SP4116 |
3 |
SP65116-1 |
3 |
SP10116-1 |
3 |
SP15116-1 |
3 |
| 28 |
Lower Strainer |
- |
116L |
SP4116L |
1 |
SP65116L |
1 |
SP10116L |
1 |
SP15116L |
1 |
| 29 |
Casing Seal |
- |
124 |
SP4124 |
1 |
D3125 |
1 |
E4124 |
1 |
DH2125 |
1 |
| 30 |
Discharge Pipe |
- |
154 |
PV4154 |
1 |
QV65154 |
1 |
RV10154 |
1 |
SV15154 |
1 |
| A=Chrome Alloy R=Rubber D=Ductile Iron G=Grey Iron S= Steel |
| No. |
Part Name |
Material |
Part No. |
40PV-SPR |
QTY |
65QV-SPR |
QTY |
100RV-SPR |
QTY |
150RV-SPR |
QTY |
| 31 |
Flinger |
- |
184 |
PV184 |
1 |
QV184-1 |
1 |
RV-184-1 |
1 |
SV184-1 |
1 |
| 32 |
Discharge Pipe Gasket |
- |
204 |
SP4204 |
1 |
SP65204 |
1 |
SP10204 |
1 |
SP15204 |
1 |
| 33 |
Impeller |
A/R |
206 |
SP4206 |
1 |
SP65206 |
1 |
SP10206 |
1 |
SP15206 |
1 |
| 34 |
O Ring |
R |
217 |
PV217 |
1 |
QV217 |
1 |
RV217 |
1 |
SV217 |
1 |
| 35 |
Spacer Set |
- |
290 |
PV290 |
12 |
QV290 |
16 |
RV290 |
24 |
SV290 |
30 |
| 36 |
Suction Pipe |
- |
322 |
SP4322 |
1 |
SP65322 |
1 |
SP10322 |
1 |
SP15322 |
1 |
| A=Chrome Alloy R=Rubber D=Ductile Iron G=Grey Iron S= Steel |
Related Slurry Sand Pumps
Related pump
Horizontal Slurry Pump
Main Pump Model: 1.5/1,2/1.5,3/2,4/3,6/4,8/6,10/8,12/10,14/12,
18/16,20/18
Discharge Diameters 1″ to 18″ (25mm to 450mm)
Pump Heads Max to 390ft (118m)
Flow Rates Max to 24000 gpm (5400m3/h)
Horizontal slurry pumps are cantilevered , horizontal, centrifugal double casing slurry pumps.
They are designed for hyper heavy duty applications such as mill discharge, process plant, coal washing, dregding sands, tailings and high pressure pipelines, as well as other specialty applications
Typical Application
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling
Vertical Slurry Pump
Main Pump Model:40PV-SP 65QV-SP 100RV-SP 150SV-SP 200SV-SP 250SV-SP
Discharge Diameters 1.5″ to 10″ (40mm to 250mm)
Pump Heads Max to 160ft (50m)
Flow Rates Max to 6,000gpm (1,350m3/h)
NaiPu-ZJL(SP)Series slurry pumps are designed for handling abrasive and corrosive slurries whilst submerged in sumps or pit. The pump has no shaft seal, easy to maintenance and cost less. Hard metal and rubber parts are optional for different applications and interchangeable. Suit for most applications where sump slurry pumps are needed.
Typical Application
Sump drainage washdown
Floor drainage
Mill sumps
Carbon transfer
Monitoring
Magnetite mixing
Gravel Sand Pump
Main Model :6/4D-G 8/6E-G 10/8F-G 10/8S-G 12/10G-G 14/12G-G 10/8S-GH 10/8F-GH 12/10G-GH 18/16 T-G
Discharge Size: 100-400mm(4inch to 16inch)
Capacity: 180-4000 (m³/h)
Head: 25-76(m)
G(H) Gravel Sand Pump are designed for continuous pumping of highly abrasive slurries that containing large particles which other Atlas pumps can not handle, Large passage inside casing make
it the best choice for gravel, dredging and other applications where large particles needed to be handled, especially for big flow, high concentration, high head media. Low NPSH requirement and robust design ensures long life under severe duties.
Typical Application
Slag Granulation
Suction Hopper Dredging
Dredging
Barge Loading
Sand Reclamation
ZJQ Submersible slurry pump
Main Model: ZJQ20-30-5.5,ZJQ 100-10-7.5 ,ZJQ50-21-11,ZJQ50-26-15,ZJQ 100-25-22,ZJQ500-20-75,ZJQ2000-35-315, etc
Discharge Size: 80mm-400mm
Capacity: 25m3/h-2000m3/h
Head: 12m-60m
Naipu® NP-ZJQsubmersible Slurry motor pump is a kind of hydraulic mechanism which motor connects directly with pump.the pump adopts excellent material, advanced structure, and it is with wide flowing passage & strong delivery ability. The hydraulic parts are wear-resistant. The pump is yet completed with control unit.
Typical Applications---
Delivering Liquid Sand, Coal Cinder Solid
Clearing The Mud In Lake, River, Sea
Drging Widening Channel
Froth Slurry Pump
Main Pump Model:2QV-AF(R) 3QV-AF(R) 6SV-AF(R) 8SV-AF(R) ,2CAHF, 3DAHF, 6EAHF
Discharge Size: 50mm-150mm
Capacity: 7.2m3/h-330m3/h
Head: 5m-30m
Naipu® NP-AFfroth pumps are of heavy duty construction, designed for continuous pumping of highly abrasive and corrosive frothy slurries. They have a vertical shaft configuration, and comprise a hopper, with vertical Bearing Assembly, and Type'NP-AH' pump wet-end. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casing liners and Impellers.
Typical Applications---
Minerals Flotation Processing
Handle Frothy Slurries
Company Profile
Naipu Pump is a professional global manufacturer of industrial pumps with more than 30 years production experience. Mainly produces various types of slurry pumps, sewage pumps, sump pumps, high chromium alloy accessories and various OEM and ODM production.Already passed the quality certification ISO9001, environmental certification ISO14001, and health Certification ISO45001. The company covers an area of more than 60,000 square meters, has 150 skilled workers, 50 professional and technical service personnel, and its products are sold all over the world. The annual output is 8,000 tons of accessories, 8,000 pumps, and annual sales of 20 million US dollars.
After years of sustainable development, Naipu has gradually upgraded to an environmentally friendly factory, with environmentally friendly resin sand machine modeling, high-efficiency casting electric furnace, heat treatment, and rough sand cleaning system. Every molding has undergone strict inspection to ensure the full brushing of the protective coating, which is the prerequisite to ensure the production of qualified castings.After passing the environmental and health certification, the workers' working environment has been improved.
Our spare parts inventory is very sufficient to ensure that each customer can replace the spare parts in the first time, and will receive sufficient size inspection and packaging before shipment.
Our Products are suitable for all slurry pumping applications - chemical, mineral processing, power generation and general industry.
NaiPu Main products
1. NAH , HH L Horizontal Slurry Pump
2. SP Vertical sump pump
3. ZJQ Submersible slurry pump
4. G Horizontal sand gravel pump
5. ZJQ Submersible sand pump
6. WS Dredging pump
7. AF Vertical Froth Pump
8 .AHF Horizontal Froth Pump
9. TL(R) Desulphurization Pump
10.Clean Water Pump
11. OEM Casting machinery wear parts
| NHA series |
L(R) ,M |
HH |
SP(R) |
G |
AF Series |
| 1.5/1B-NAH(R) |
20A-L |
1.5/1 C-HH |
40PV-SP(R) |
6/4D-G |
2QV-AF |
| 2/1.5B-NAH(R) |
50B-L(R) |
3/2D-HH |
65QV-SP(R) |
8/6E-G |
3QV-AF |
| 3/2C-NAH(R) |
75C-L |
4/3E-HH |
100RV-SP(R) |
10/8F-G |
6SV-AF |
| 4/3C-NAH(R) |
100 D-L |
4/3X-HH |
150SV-SP(R) |
10/8S-G |
8SV-AF |
| 6/4D-NAH(R) |
150E-L |
6/4F-HH |
200SV-SP |
12/10G-G |
2AHF |
| 6/4E-NAH(R) |
300S-L |
6/4X-HH |
250TV-SP |
14/12G-G |
3AHF |
| 8/6E-NAH(R) |
10/8 R-M |
6S-H |
|
14/12T-G |
4AHF |
| 8/6R-NAH(R) |
10/8 E-M |
8/6S-H |
|
16/14 G-G |
6AHF |
| 10/8F-NAH(R) |
12/10F-M |
8/6X-H |
|
16/14TU-GH |
|
| 10/8X-NAH(R) |
|
6S-HP |
|
16/14H-GH |
|
| 12/10ST-NAH(R) |
|
8/6S-HP |
|
18/16G-G |
|
| 14/12ST-NAH(R) |
|
8/6X-HP |
|
18/16 TU-GH |
|
| 16/14TU-NAH(R) |
|
|
|
|
|
| 20/18G(TU)-NAH(R) |
|
|
|
|
|
Spare Parts
Impeller, Volute Liner, Casing, ThroatBush, Frame Plate Liner Insert, Cover Plate, Frame Plate, Pump Liner Expeller, Expeller Ring, Stuffing Box, Expeller, Pump Shaft, shaft sleeve, Shaft Spacer, Bearing Assembly, Base, Stuffing Box, Gland Assembly, Bearing Housing, Lantern Ring, pump discharge pipe, flange, and so on.
We also can supply OEM Service according to drawing or samples
WorkShop
Shijiazhuang NaiPu Pump Co., Ltd have own Foundry workshop, Machining Workshop, Assembly workshop, Heat treatment equipment and advanced test equipment.
Welcome to visit our factory!
FAQ
1. What Products does naipu pump mainly produce?
Naipu mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is Naipu direct factory or trader?
Naipu own foundry workshop, Machining Workshop, and Assembly workshop.
The factory is located in ShiJiazhuang City, Hebei , China,covers an area of 30,000m.
Welcome to visit Naipu factory anytime.
3. The Min MQQ
The MQQ is one PCS spare parts.
4. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better.
Welcome to Contact Me
ShiJiaZhuang NaiPu Pump Co., Ltd
Contact person: Kitty Liu
Shijiazhuang, Headquarters
Add.: No. 368, Xinshi North Road, Shijiazhuang, Hebei Province, China
Audited Supplier 
){kind=link}
){kind=link}